[tip: x86/boot] x86/boot/compressed: Move efi32_entry out of head_64.S

From: tip-bot2 for Ard Biesheuvel
Date: Thu Nov 24 2022 - 03:13:34 EST


The following commit has been merged into the x86/boot branch of tip:

Commit-ID: 73a6dec80e2acedaef3ca603d4b5799049f6e9f8
Gitweb: https://git.kernel.org/tip/73a6dec80e2acedaef3ca603d4b5799049f6e9f8
Author: Ard Biesheuvel <ardb@xxxxxxxxxx>
AuthorDate: Tue, 22 Nov 2022 17:10:05 +01:00
Committer: Borislav Petkov <bp@xxxxxxx>
CommitterDate: Tue, 22 Nov 2022 19:24:09 +01:00

x86/boot/compressed: Move efi32_entry out of head_64.S

Move the efi32_entry() routine out of head_64.S and into efi-mixed.S,
which reduces clutter in the complicated startup routines. It also
permits linkage of some symbols used by code to be made local.

Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Link: https://lore.kernel.org/r/20221122161017.2426828-6-ardb@xxxxxxxxxx
---
arch/x86/boot/compressed/efi_mixed.S | 57 ++++++++++++++++++++++-----
arch/x86/boot/compressed/head_64.S | 45 +---------------------
2 files changed, 47 insertions(+), 55 deletions(-)

diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index 58ab2e1..3487484 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -105,7 +105,7 @@ SYM_FUNC_START(__efi64_thunk)
/*
* Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
* and IDT that was installed when the kernel started executing. The
- * pointers were saved at the EFI stub entry point in head_64.S.
+ * pointers were saved by the efi32_entry() routine below.
*
* Pass the saved DS selector to the 32-bit code, and use far return to
* restore the saved CS selector.
@@ -217,22 +217,59 @@ SYM_FUNC_START_LOCAL(efi_enter32)
lret
SYM_FUNC_END(efi_enter32)

+/*
+ * This is the common EFI stub entry point for mixed mode.
+ *
+ * Arguments: %ecx image handle
+ * %edx EFI system table pointer
+ * %esi struct bootparams pointer (or NULL when not using
+ * the EFI handover protocol)
+ *
+ * Since this is the point of no return for ordinary execution, no registers
+ * are considered live except for the function parameters. [Note that the EFI
+ * stub may still exit and return to the firmware using the Exit() EFI boot
+ * service.]
+ */
+SYM_FUNC_START(efi32_entry)
+ call 1f
+1: pop %ebx
+
+ /* Save firmware GDTR and code/data selectors */
+ sgdtl (efi32_boot_gdt - 1b)(%ebx)
+ movw %cs, (efi32_boot_cs - 1b)(%ebx)
+ movw %ds, (efi32_boot_ds - 1b)(%ebx)
+
+ /* Store firmware IDT descriptor */
+ sidtl (efi32_boot_idt - 1b)(%ebx)
+
+ /* Store boot arguments */
+ leal (efi32_boot_args - 1b)(%ebx), %ebx
+ movl %ecx, 0(%ebx)
+ movl %edx, 4(%ebx)
+ movl %esi, 8(%ebx)
+ movb $0x0, 12(%ebx) // efi_is64
+
+ /* Disable paging */
+ movl %cr0, %eax
+ btrl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ jmp startup_32
+SYM_FUNC_END(efi32_entry)
+
.data
.balign 8
-SYM_DATA_START(efi32_boot_gdt)
+SYM_DATA_START_LOCAL(efi32_boot_gdt)
.word 0
.quad 0
SYM_DATA_END(efi32_boot_gdt)

-SYM_DATA_START(efi32_boot_idt)
+SYM_DATA_START_LOCAL(efi32_boot_idt)
.word 0
.quad 0
SYM_DATA_END(efi32_boot_idt)

-SYM_DATA_START(efi32_boot_cs)
- .word 0
-SYM_DATA_END(efi32_boot_cs)
-
-SYM_DATA_START(efi32_boot_ds)
- .word 0
-SYM_DATA_END(efi32_boot_ds)
+SYM_DATA_LOCAL(efi32_boot_cs, .word 0)
+SYM_DATA_LOCAL(efi32_boot_ds, .word 0)
+SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
+SYM_DATA(efi_is64, .byte 1)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 9dd9010..9cd2a28 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -289,48 +289,6 @@ SYM_FUNC_START(efi32_stub_entry)
popl %esi
jmp efi32_entry
SYM_FUNC_END(efi32_stub_entry)
-
- .text
-/*
- * This is the common EFI stub entry point for mixed mode.
- *
- * Arguments: %ecx image handle
- * %edx EFI system table pointer
- * %esi struct bootparams pointer (or NULL when not using
- * the EFI handover protocol)
- *
- * Since this is the point of no return for ordinary execution, no registers
- * are considered live except for the function parameters. [Note that the EFI
- * stub may still exit and return to the firmware using the Exit() EFI boot
- * service.]
- */
-SYM_FUNC_START_LOCAL(efi32_entry)
- call 1f
-1: pop %ebx
-
- /* Save firmware GDTR and code/data selectors */
- sgdtl (efi32_boot_gdt - 1b)(%ebx)
- movw %cs, (efi32_boot_cs - 1b)(%ebx)
- movw %ds, (efi32_boot_ds - 1b)(%ebx)
-
- /* Store firmware IDT descriptor */
- sidtl (efi32_boot_idt - 1b)(%ebx)
-
- /* Store boot arguments */
- leal (efi32_boot_args - 1b)(%ebx), %ebx
- movl %ecx, 0(%ebx)
- movl %edx, 4(%ebx)
- movl %esi, 8(%ebx)
- movb $0x0, 12(%ebx) // efi_is64
-
- /* Disable paging */
- movl %cr0, %eax
- btrl $X86_CR0_PG_BIT, %eax
- movl %eax, %cr0
-
- jmp startup_32
-SYM_FUNC_END(efi32_entry)
- __HEAD
#endif

.code64
@@ -763,9 +721,6 @@ SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end)
SYM_DATA(image_offset, .long 0)
#endif
#ifdef CONFIG_EFI_MIXED
-SYM_DATA(efi32_boot_args, .long 0, 0, 0)
-SYM_DATA(efi_is64, .byte 1)
-
#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime)
#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol)
#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base)