Re: [PATCH v3] igb: Allocate MSI-X vector when testing

From: Maciej Fijalkowski
Date: Wed Nov 23 2022 - 10:43:01 EST


On Wed, Nov 23, 2022 at 10:09:26AM +0900, Akihiko Odaki wrote:
> Without this change, the interrupt test fail with MSI-X environment:
>
> $ sudo ethtool -t enp0s2 offline
> [ 43.921783] igb 0000:00:02.0: offline testing starting
> [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down
> [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> [ 51.272202] igb 0000:00:02.0: testing shared interrupt
> [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> The test result is FAIL
> The test extra info:
> Register test (offline) 0
> Eeprom test (offline) 0
> Interrupt test (offline) 4
> Loopback test (offline) 0
> Link test (on/offline) 0
>
> Here, "4" means an expected interrupt was not delivered.
>
> To fix this, route IRQs correctly to the first MSI-X vector by setting
> IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be
> masked. The interrupt test now runs properly with this change:

Much better!

>
> $ sudo ethtool -t enp0s2 offline
> [ 42.762985] igb 0000:00:02.0: offline testing starting
> [ 50.141967] igb 0000:00:02.0: testing shared interrupt
> [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> The test result is PASS
> The test extra info:
> Register test (offline) 0
> Eeprom test (offline) 0
> Interrupt test (offline) 0
> Loopback test (offline) 0
> Link test (on/offline) 0
>
> Signed-off-by: Akihiko Odaki <akihiko.odaki@xxxxxxxxxx>

Same comment as on other patch - justify why there is no fixes tag and
specify the tree in subject.

> ---
> drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
> index e5f3e7680dc6..ff911af16a4b 100644
> --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
> +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
> @@ -1413,6 +1413,8 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
> *data = 1;
> return -1;
> }
> + wr32(E1000_IVAR_MISC, E1000_IVAR_VALID << 8);
> + wr32(E1000_EIMS, BIT(0));
> } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
> shared_int = false;
> if (request_irq(irq,
> --
> 2.38.1
>