Re: [v4 2/5] dt-bindings: pwm: Add bindings for aspeed pwm controller

[Krzysztof Kozlowski]

On 23/11/2022 07:16, Billy Tsai wrote:
> Add the aspeed pwm device bindings which should be the child-node of
> pwm-tach mfd.

Subject: drop second, redundant "bindings".

> 
> Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
> ---
>  .../bindings/pwm/aspeed,ast2600-pwm.yaml      | 54 +++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml b/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml
> new file mode 100644
> index 000000000000..68a60fc73902
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2021 Aspeed, Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/aspeed,ast2600-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed Ast2600 PWM controller
> +
> +maintainers:
> +  - Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
> +
> +description: |
> +  The Aspeed PWM controller supports up to 16 PWM outputs.
> +  This module is part of the ast2600-pwm-tach multi-function device. For more
> +  details see ../mfd/aspeed,ast2600-pwm-tach.yaml.
> +
> +allOf:
> +  - $ref: pwm.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2600-pwm
> +
> +  "#pwm-cells":
> +    const: 3

Blank line.

> +patternProperties:
> +  "^pwm@[a-z0-9]+$":
> +    description: Set extend properties for each pwm channel.

Description is not a correct sentence. Description explains the hardware
property you have here.

> +    type: object
> +    properties:
> +      reg:
> +        description:
> +          The pwm channel index.
> +        maxItems: 1
> +
> +      aspeed,wdt-reload-enable:
> +        type: boolean
> +        description:
> +          Enable the function of wdt reset reload duty point.
> +
> +      aspeed,wdt-reload-duty-point:
> +        description:
> +          Define the duty point after wdt reset, 0 = 100%
> +        minimum: 0
> +        maximum: 255

Why maximum is 255? Why 0=100%? 0 should be equal to 0 and maximum to
some maximum value (e.g. 100%). If these are percents, use appropriate
units. If these are not - what are these? You need a $ref in such case.

> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false

Best regards,
Krzysztof