[PATCH v3 1/3] Bluetooth: btusb: mediatek: use readx_poll_timeout instead of open coding

From: sean.wang
Date: Mon Nov 21 2022 - 14:21:14 EST


From: Sean Wang <sean.wang@xxxxxxxxxxxx>

Use readx_poll_timeout instead of open coding to poll the hardware reset
status until it is done.

Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
The patch is built and tested on the top of the patches
[v6,1/3] Bluetooth: Add support for hci devcoredump
[v6,2/3] Bluetooth: btusb: Add btusb devcoredump support
[v6,3/3] Bluetooth: btintel: Add Intel devcoredump support
which are contributed from Manish Mandlik

v2: use 20ms as the unit to poll according to the requirement of
readx_poll_timeout

v3: refine btusb_mtk_reset_done and drop the necessary error check
in btusb_mtk_cmd_timeout
---
drivers/bluetooth/btusb.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8d076efdf6a8..791bd3f620fc 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2321,8 +2321,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
#define MTK_EP_RST_OPT 0x74011890
#define MTK_EP_RST_IN_OUT_OPT 0x00010001
#define MTK_BT_RST_DONE 0x00000100
-#define MTK_BT_RESET_WAIT_MS 100
-#define MTK_BT_RESET_NUM_TRIES 10

static void btusb_mtk_wmt_recv(struct urb *urb)
{
@@ -2679,6 +2677,16 @@ static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
return btusb_mtk_reg_read(data, reg, id);
}

+static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ u32 val = 0;
+
+ btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
+
+ return val & MTK_BT_RST_DONE;
+}
+
static int btusb_mtk_setup(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2868,7 +2876,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
u32 val;
- int err, retry = 0;
+ int err;

/* It's MediaTek specific bluetooth reset mechanism via USB */
if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
@@ -2899,18 +2907,10 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);

- /* Poll the register until reset is completed */
- do {
- btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
- if (val & MTK_BT_RST_DONE) {
- bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
- break;
- }
-
- bt_dev_dbg(hdev, "Polling Bluetooth Reset CR");
- retry++;
- msleep(MTK_BT_RESET_WAIT_MS);
- } while (retry < MTK_BT_RESET_NUM_TRIES);
+ err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+ val & MTK_BT_RST_DONE, 20000, 1000000);
+ if (err < 0)
+ bt_dev_err(hdev, "Reset timeout");

btusb_mtk_id_get(data, 0x70010200, &val);
if (!val)
--
2.25.1