Re: [PATCH v2 5/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A2 Lite

From: Konrad Dybcio
Date: Mon Nov 21 2022 - 06:23:28 EST




On 19.11.2022 21:37, Luca Weiss wrote:
> From: Alejandro Tafalla <atafalla@xxxxxxxxx>
>
> Add device tree for the Xiaomi Mi A2 Lite (daisy) smartphone. This
> device is based on Snapdragon 625 (msm8953) SoC.
>
> Signed-off-by: Alejandro Tafalla <atafalla@xxxxxxxxx>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> Changes in v2:
> * address review comments from v1
>
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8953-xiaomi-daisy.dts | 319 ++++++++++++++++++
> 2 files changed, 320 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index eb3cfbac6b82..158d1f19eba3 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
> new file mode 100644
> index 000000000000..7627e9307a15
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
> @@ -0,0 +1,319 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Alejandro Tafalla
> + */
> +/dts-v1/;
> +
> +#include "msm8953.dtsi"
> +#include "pm8953.dtsi"
> +#include "pmi8950.dtsi"
> +
> +/delete-node/ &adsp_fw_mem;
> +/delete-node/ &qseecom_mem;
> +/delete-node/ &wcnss_fw_mem;
> +
> +/ {
> + model = "Xiaomi Mi A2 Lite";
> + compatible = "xiaomi,daisy", "qcom,msm8953";
> + chassis-type = "handset";
> + qcom,msm-id = <293 0>;
> + qcom,board-id= <0x1000b 0x9>;
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer@90001000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x90001000 0 (1920 * 2280 * 3)>;
> +
> + width = <1080>;
> + height = <2280>;
> + stride = <(1080 * 3)>;
> + format = "r8g8b8";
> +
> + power-domains = <&gcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_VSYNC_CLK>,
> + <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_BYTE0_CLK>,
> + <&gcc GCC_MDSS_PCLK0_CLK>,
> + <&gcc GCC_MDSS_ESC0_CLK>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_key_default>;
> +
> + key-volume-up {
> + label = "Volume Up";
> + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +
> + reserved-memory {
> + qseecom_mem: qseecom@84a00000 {
> + reg = <0x0 0x84a00000 0x0 0x1900000>;
> + no-map;
> + };
> +
> + adsp_fw_mem: adsp@8d600000 {
> + reg = <0x0 0x8d600000 0x0 0x1200000>;
> + no-map;
> + };
> +
> + wcnss_fw_mem: wcnss@8e800000 {
> + reg = <0x0 0x8e800000 0x0 0x700000>;
> + no-map;
> + };
> + };
> +
> + /*
> + * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are
> + * normally proxied via ADSP firmware. GPIOs aren't protected.
> + */
> + i2c-sensors {
> + compatible = "i2c-gpio";
> + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + imu@6a {
> + compatible = "st,lsm6dsl";
> + reg = <0x6a>;
> + vdd-supply = <&pm8953_l10>;
> + vddio-supply = <&pm8953_l6>;
> + mount-matrix = "-1", "0", "0",
> + "0", "-1", "0",
> + "0", "0", "1";
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&hsusb_phy {
> + vdd-supply = <&pm8953_l3>;
> + vdda-pll-supply = <&pm8953_l7>;
> + vdda-phy-dpdm-supply = <&pm8953_l13>;
> +
> + status = "okay";
> +};
> +
> +&i2c_2 {
> + status = "okay";
> +
> + speaker_codec: audio-codec@3a {
> + compatible = "maxim,max98927";
> + reg = <0x3a>;
> +
> + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
> +
> + vmon-slot-no = <1>;
> + imon-slot-no = <1>;
> + interleave_mode = <0>;
> +
> + #sound-dai-cells = <0>;
> + };
> +};
> +
> +&i2c_3 {
> + status = "okay";
> +
> + touchscreen@38 {
> + compatible = "edt,edt-ft5406";
> + reg = <0x38>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
> +
> + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&pm8953_l10>;
> +
> + touchscreen-size-x = <1080>;
> + touchscreen-size-y = <2280>;
> + };
> +};
> +
> +&pm8953_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> + status = "okay";
> +};
> +
> +&pmi8950_wled {
> + qcom,current-limit-microamp = <20000>;
> + qcom,num-strings = <2>;
> +
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + regulators {
> + compatible = "qcom,rpm-pm8953-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> + vdd_s7-supply = <&vph_pwr>;
> + vdd_l1-supply = <&pm8953_s3>;
> + vdd_l2_l3-supply = <&pm8953_s3>;
> + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
> + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
> + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
> +
> + pm8953_s1: s1 {
> + regulator-min-microvolt = <863000>;
> + regulator-max-microvolt = <1152000>;
> + };
> +
> + pm8953_s3: s3 {
> + regulator-min-microvolt = <1224000>;
> + regulator-max-microvolt = <1224000>;
> + };
> +
> + pm8953_s4: s4 {
> + regulator-min-microvolt = <1896000>;
> + regulator-max-microvolt = <2048000>;
> + };
> +
> + pm8953_l1: l1 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + pm8953_l2: l2 {
> + regulator-min-microvolt = <975000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + pm8953_l3: l3 {
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <925000>;
> + regulator-allow-set-load;
> + };
> +
> + pm8953_l5: l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8953_l6: l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + pm8953_l7: l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1900000>;
> + };
> +
> + pm8953_l8: l8 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + pm8953_l9: l9 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8953_l10: l10 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> +
> + pm8953_l11: l11 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8953_l12: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8953_l13: l13 {
> + regulator-min-microvolt = <3125000>;
> + regulator-max-microvolt = <3125000>;
> + };
> +
> + pm8953_l16: l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8953_l17: l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + pm8953_l19: l19 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1350000>;
> + };
> +
> + pm8953_l22: l22 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> +
> + pm8953_l23: l23 {
> + regulator-min-microvolt = <975000>;
> + regulator-max-microvolt = <1225000>;
> + };
> + };
> +};
> +
> +&sdhc_1 {
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +
> + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
> +
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
> +};
> +
> +&uart_0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart_console_active>;
> +
> + status = "okay";
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + dr_mode = "peripheral";
> +};