Re: [PATCH 1/2] dt-bindings: display/msm: add support for the display

From: Rob Herring
Date: Sun Nov 20 2022 - 10:09:34 EST



On Sun, 20 Nov 2022 14:37:36 +0100, Adam Skladowski wrote:
> Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
> SM6115 platform.
> Configuration for DSI/PHY is shared with QCM2290 so compatibles are reused.
> Lack of dsi phy supply in example is intended
> due to fact on qcm2290, sm6115 and sm6125
> this phy is supplied via power domain, not regulator.
>
> Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
> ---
> .../bindings/display/msm/qcom,sm6115-dpu.yaml | 87 ++++++++
> .../display/msm/qcom,sm6115-mdss.yaml | 187 ++++++++++++++++++
> 2 files changed, 274 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/display/msm/dpu-common.yaml
./Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/display/msm/mdss-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.example.dtb: display-controller@5e01000: False schema does not allow {'compatible': ['qcom,sm6115-dpu'], 'reg': [[98570240, 585728], [99287040, 8200]], 'reg-names': ['mdp', 'vbif'], 'clocks': [[4294967295, 63], [4294967295, 2], [4294967295, 10], [4294967295, 12], [4294967295, 16], [4294967295, 18]], 'clock-names': ['bus', 'iface', 'core', 'lut', 'rot', 'vsync'], 'operating-points-v2': [[4294967295]], 'power-domains': [[4294967295, 0]], 'interrupts': [[0]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]]}}}, '$nodename': ['display-controller@5e01000']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.example.dtb: display-controller@5e01000: Unevaluated properties are not allowed ('interrupts', 'operating-points-v2', 'ports', 'power-domains' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.example.dtb: mdss@5e00000: False schema does not allow {'#address-cells': [[1]], '#size-cells': [[1]], 'compatible': ['qcom,sm6115-mdss'], 'reg': [[98566144, 4096]], 'reg-names': ['mdss'], 'power-domains': [[4294967295, 0]], 'clocks': [[4294967295, 61], [4294967295, 63], [4294967295, 10]], 'clock-names': ['iface', 'bus', 'core'], 'interrupts': [[0, 186, 4]], 'interrupt-controller': True, '#interrupt-cells': [[1]], 'iommus': [[4294967295, 1056, 2], [4294967295, 1057, 0]], 'ranges': True, 'display-controller@5e01000': {'compatible': ['qcom,sm6115-dpu'], 'reg': [[98570240, 585728], [99287040, 8200]], 'reg-names': ['mdp', 'vbif'], 'clocks': [[4294967295, 63], [4294967295, 2], [4294967295, 10], [4294967295, 12], [4294967295, 16], [4294967295, 18]], 'clock-names': ['bus', 'iface', 'core', 'lut', 'rot', 'vsync'], 'operating-points-v2': [[4294967295]], 'power-domains': [[4294967295, 0]], 'int
errupts': [[0]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[1]], 'phandle': [[3]]}}}}, 'dsi@5e94000': {'compatible': ['qcom,dsi-ctrl-6g-qcm2290'], 'reg': [[99172352, 1024]], 'reg-names': ['dsi_ctrl'], 'interrupts': [[4]], 'clocks': [[4294967295, 4], [4294967295, 7], [4294967295, 14], [4294967295, 8], [4294967295, 2], [4294967295, 63]], 'clock-names': ['byte', 'byte_intf', 'pixel', 'core', 'iface', 'bus'], 'assigned-clocks': [[4294967295, 5], [4294967295, 15]], 'assigned-clock-parents': [[2, 0], [2, 1]], 'operating-points-v2': [[4294967295]], 'power-domains': [[4294967295, 0]], 'phys': [[2]], 'phy-names': ['dsi'], '#address-cells': [[1]], '#size-cells': [[0]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[3]], 'phandle': [[1]]}}, 'port@1': {'reg': [[1]], 'endpoint': {}}}}, 'phy@5e94400': {'compatible': ['qcom,dsi-phy-14nm-2290'], 'reg': [[9917
3376, 256], [99173632, 768], [99174400, 392]], 'reg-names': ['dsi_phy', 'dsi_phy_lane', 'dsi_pll'], '#clock-cells': [[1]], '#phy-cells': [[0]], 'clocks': [[4294967295, 2], [4294967295, 0]], 'clock-names': ['iface', 'ref'], 'phandle': [[2]]}, '$nodename': ['mdss@5e00000']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.example.dtb: mdss@5e00000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'interrupt-controller', 'interrupts', 'power-domains', 'ranges', 'reg', 'reg-names' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.example.dtb: display-controller@5e01000: False schema does not allow {'compatible': ['qcom,sm6115-dpu'], 'reg': [[98570240, 585728], [99287040, 8200]], 'reg-names': ['mdp', 'vbif'], 'clocks': [[4294967295, 63], [4294967295, 2], [4294967295, 10], [4294967295, 12], [4294967295, 16], [4294967295, 18]], 'clock-names': ['bus', 'iface', 'core', 'lut', 'rot', 'vsync'], 'operating-points-v2': [[4294967295]], 'power-domains': [[4294967295, 0]], 'interrupts': [[0]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[1]], 'phandle': [[3]]}}}, '$nodename': ['display-controller@5e01000']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.example.dtb: display-controller@5e01000: Unevaluated properties are not allowed ('interrupts', 'operating-points-v2', 'ports', 'power-domains' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221120133744.24808-2-a39.skl@xxxxxxxxx

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command.