[PATCH AUTOSEL 4.14 4/6] spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run

From: Sasha Levin
Date: Fri Nov 18 2022 - 21:30:03 EST


From: Sean Nyekjaer <sean@xxxxxxxxxx>

[ Upstream commit 62aa1a344b0904549f6de7af958e8a1136fd5228 ]

When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:

spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22

Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.

Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.

Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/spi/spi-stm32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index c8e546439fff..87502f39bc4f 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -255,7 +255,7 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz)
u32 div, mbrdiv;

/* Ensure spi->clk_rate is even */
- div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz);
+ div = DIV_ROUND_CLOSEST(spi->clk_rate & ~0x1, speed_hz);

/*
* SPI framework set xfer->speed_hz to master->max_speed_hz if
--
2.35.1