Re: [PATCH v3 3/4] arm64: dts: ti: Add initial support for J784S4 SoC

From: Andrew Davis
Date: Fri Nov 18 2022 - 12:33:31 EST


On 11/16/22 7:04 AM, Apurva Nandan wrote:
The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.

Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F
MCUs, 4 C7x floating point vector DSPs with Matrix Multiply Accelerator
(MMA) for deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and
Depth and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.

See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52

Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
Signed-off-by: Nishanth Menon <nm@xxxxxx>
Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 1008 +++++++++++++++++
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 316 ++++++
arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 286 +++++
3 files changed, 1610 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
new file mode 100644
index 000000000000..828f339ddbdc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+ msmc_ram: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x70000000 0x0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x70000000 0x800000>;
+
+ atf-sram@0 {
+ reg = <0x0 0x20000>;
+ };
+
+ tifs-sram@1f0000 {
+ reg = <0x1f0000 0x10000>;
+ };
+
+ l3cache-sram@200000 {
+ reg = <0x200000 0x200000>;
+ };

The amount of SRAM is boot time configurable (and may even change at runtime
if we work out a couple minor gotchas). Does it make more sense to have
this node fixed up in the bootloader based on the chosen amount of SRAM vs
L3-Cache?

Either way, do we need the l3cache-sram node here? I'm thinking the size
of the SRAM node itself should be modified. Since the L3 grows from the
end, all that is needed is to reduce the "reg =" size. At the same time
the l3-cache0 node below should gain in "cache-size" property.

(We don't need to do this for this series, the other J7x DTs have the
same issue, so maybe I'll go fix them all together sometime later)

+ };
+
+ gic500: interrupt-controller@1800000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+ <0x00 0x01900000 0x00 0x100000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
+
+ /* vcpumntirq: virtual CPU interface maintenance interrupt */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic_its: msi-controller@1820000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x00 0x01820000 0x00 0x10000>;
+ socionext,synquacer-pre-its = <0x1000000 0x400000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ main_gpio_intr: interrupt-controller@a00000 {
+ compatible = "ti,sci-intr";
+ reg = <0x00 0x00a00000 0x00 0x800>;
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <10>;
+ ti,interrupt-ranges = <8 360 56>;
+ };
+
+ main_pmx0: pinctrl@11c000 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x0 0x11c000 0x0 0x120>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x200>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 146 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x200>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 388 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x200>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 389 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart3: serial@2830000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02830000 0x00 0x200>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 390 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart4: serial@2840000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02840000 0x00 0x200>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 391 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart5: serial@2850000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02850000 0x00 0x200>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 392 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart6: serial@2860000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02860000 0x00 0x200>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 393 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart7: serial@2870000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02870000 0x00 0x200>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 394 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart8: serial@2880000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02880000 0x00 0x200>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 395 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_uart9: serial@2890000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02890000 0x00 0x200>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 396 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_gpio0: gpio@600000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00600000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <145>, <146>, <147>, <148>, <149>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <66>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 163 0>;
+ clock-names = "gpio";
+ status = "disabled";
+ };
+
+ main_gpio2: gpio@610000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00610000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <154>, <155>, <156>, <157>, <158>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <66>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 164 0>;
+ clock-names = "gpio";
+ status = "disabled";
+ };
+
+ main_gpio4: gpio@620000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00620000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <163>, <164>, <165>, <166>, <167>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <66>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 165 0>;
+ clock-names = "gpio";
+ status = "disabled";
+ };
+
+ main_gpio6: gpio@630000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00630000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <172>, <173>, <174>, <175>, <176>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <66>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 166 0>;
+ clock-names = "gpio";
+ status = "disabled";
+ };
+
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02000000 0x00 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 270 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02010000 0x00 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 271 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02020000 0x00 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 272 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02030000 0x00 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 273 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_i2c4: i2c@2040000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02040000 0x00 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 274 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_i2c5: i2c@2050000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02050000 0x00 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 275 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_i2c6: i2c@2060000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x02060000 0x00 0x100>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 276 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ main_sdhci0: mmc@4f80000 {
+ compatible = "ti,j721e-sdhci-8bit";
+ reg = <0x00 0x04f80000 0x00 0x1000>,
+ <0x00 0x04f88000 0x00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 140 1>, <&k3_clks 140 2>;
+ clock-names = "clk_ahb", "clk_xin";
+ assigned-clocks = <&k3_clks 140 2>;
+ assigned-clock-parents = <&k3_clks 140 3>;
+ bus-width = <8>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-ddr52 = <0x6>;
+ ti,otap-del-sel-hs200 = <0x8>;
+ ti,otap-del-sel-hs400 = <0x5>;
+ ti,itap-del-sel-legacy = <0x10>;
+ ti,itap-del-sel-mmc-hs = <0xa>;
+ ti,strobe-sel = <0x77>;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ dma-coherent;
+ no-1-8-v;
+ status = "disabled";
+ };
+
+ main_sdhci1: mmc@4fb0000 {
+ compatible = "ti,j721e-sdhci-4bit";
+ reg = <0x00 0x04fb0000 0x00 0x1000>,
+ <0x00 0x04fb8000 0x00 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 141 3>, <&k3_clks 141 4>;
+ clock-names = "clk_ahb", "clk_xin";
+ assigned-clocks = <&k3_clks 141 4>;
+ assigned-clock-parents = <&k3_clks 141 5>;
+ bus-width = <4>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x5>;
+ ti,otap-del-sel-ddr50 = <0xc>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
+ dma-coherent;
+ sdhci-caps-mask = <0x00000003 0x00000000>;
+ no-1-8-v;
+ status = "disabled";
+ };
+
+ main_navss: bus@30000000 {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+ ti,sci-dev-id = <280>;

Do we need ti,sci-dev-id here?

Also might be better reperesented by "simple-bus", it is not
really a MFD, so no "simple-mfd". Same for mcu_navss bus node.

+ dma-coherent;
+ dma-ranges;
+
+ main_navss_intr: interrupt-controller@310e0000 {
+ compatible = "ti,sci-intr";
+ reg = <0x00 0x310e0000 0x00 0x4000>;
+ ti,intr-trigger-type = <4>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <283>;
+ ti,interrupt-ranges = <0 64 64>,
+ <64 448 64>,
+ <128 672 64>;
+ };
+
+ main_udmass_inta: msi-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x00 0x33d00000 0x00 0x100000>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupt-parent = <&main_navss_intr>;
+ msi-controller;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <321>;
+ ti,interrupt-ranges = <0 0 256>;
+ };
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ hwspinlock: hwlock@30e00000 {
+ compatible = "ti,am654-hwspinlock";
+ reg = <0x00 0x30e00000 0x00 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ mailbox0_cluster0: mailbox@31f80000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f80000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster1: mailbox@31f81000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f81000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster2: mailbox@31f82000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f82000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster3: mailbox@31f83000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f83000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster4: mailbox@31f84000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f84000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster5: mailbox@31f85000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f85000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster6: mailbox@31f86000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f86000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster7: mailbox@31f87000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f87000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster8: mailbox@31f88000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f88000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster9: mailbox@31f89000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f89000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster10: mailbox@31f8a000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f8a000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox0_cluster11: mailbox@31f8b000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f8b000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster0: mailbox@31f90000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f90000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster1: mailbox@31f91000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f91000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster2: mailbox@31f92000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f92000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster3: mailbox@31f93000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f93000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster4: mailbox@31f94000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f94000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster5: mailbox@31f95000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f95000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster6: mailbox@31f96000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f96000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster7: mailbox@31f97000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f97000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster8: mailbox@31f98000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f98000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster9: mailbox@31f99000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f99000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster10: mailbox@31f9a000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f9a000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ mailbox1_cluster11: mailbox@31f9b000 {
+ compatible = "ti,am654-mailbox";
+ reg = <0x00 0x31f9b000 0x00 0x200>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <16>;
+ interrupt-parent = <&main_navss_intr>;
+ status = "disabled";
+ };
+
+ main_ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <1024>;
+ ti,sci-rm-range-gp-rings = <0x1>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <315>;
+ msi-parent = <&main_udmass_inta>;
+ };
+
+ main_udmap: dma-controller@31150000 {
+ compatible = "ti,j721e-navss-main-udmap";
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x80000>,
+ <0x0 0x35000000 0x0 0x200000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <1>;
+
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <319>;
+ ti,ringacc = <&main_ringacc>;
+
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>, /* TX_HCHAN */
+ <0x10>; /* TX_UHCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>, /* RX_HCHAN */
+ <0x0c>; /* RX_UHCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ };
+
+ cpts@310d0000 {
+ compatible = "ti,j721e-cpts";
+ reg = <0x0 0x310d0000 0x0 0x400>;
+ reg-names = "cpts";
+ clocks = <&k3_clks 282 0>;
+ clock-names = "cpts";
+ assigned-clocks = <&k3_clks 62 3>; /* CPTS_RFT_CLK */
+ assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */
+ interrupts-extended = <&main_navss_intr 391>;
+ interrupt-names = "cpts";
+ ti,cpts-periodic-outputs = <6>;
+ ti,cpts-ext-ts-inputs = <8>;
+ };
+ };
+
+ main_mcan0: can@2701000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02701000 0x00 0x200>,
+ <0x00 0x02708000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 245 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 245 6>, <&k3_clks 245 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan1: can@2711000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02711000 0x00 0x200>,
+ <0x00 0x02718000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 246 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 246 6>, <&k3_clks 246 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan2: can@2721000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02721000 0x00 0x200>,
+ <0x00 0x02728000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 247 6>, <&k3_clks 247 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan3: can@2731000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02731000 0x00 0x200>,
+ <0x00 0x02738000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 248 6>, <&k3_clks 248 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan4: can@2741000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02741000 0x00 0x200>,
+ <0x00 0x02748000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 249 6>, <&k3_clks 249 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan5: can@2751000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02751000 0x00 0x200>,
+ <0x00 0x02758000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 250 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 250 6>, <&k3_clks 250 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan6: can@2761000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02761000 0x00 0x200>,
+ <0x00 0x02768000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 251 6>, <&k3_clks 251 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan7: can@2771000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02771000 0x00 0x200>,
+ <0x00 0x02778000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 252 6>, <&k3_clks 252 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan8: can@2781000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02781000 0x00 0x200>,
+ <0x00 0x02788000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 253 6>, <&k3_clks 253 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan9: can@2791000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02791000 0x00 0x200>,
+ <0x00 0x02798000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 254 6>, <&k3_clks 254 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan10: can@27a1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027a1000 0x00 0x200>,
+ <0x00 0x027a8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 255 6>, <&k3_clks 255 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan11: can@27b1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027b1000 0x00 0x200>,
+ <0x00 0x027b8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 256 6>, <&k3_clks 256 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan12: can@27c1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027c1000 0x00 0x200>,
+ <0x00 0x027c8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 257 6>, <&k3_clks 257 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan13: can@27d1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x027d1000 0x00 0x200>,
+ <0x00 0x027d8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 258 6>, <&k3_clks 258 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan14: can@2681000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02681000 0x00 0x200>,
+ <0x00 0x02688000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 259 6>, <&k3_clks 259 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan15: can@2691000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x02691000 0x00 0x200>,
+ <0x00 0x02698000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 260 6>, <&k3_clks 260 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan16: can@26a1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x026a1000 0x00 0x200>,
+ <0x00 0x026a8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 261 6>, <&k3_clks 261 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ main_mcan17: can@26b1000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x026b1000 0x00 0x200>,
+ <0x00 0x026b8000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 262 6>, <&k3_clks 262 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
new file mode 100644
index 000000000000..cb35e0c827c1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+ sms: system-controller@44083000 {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+
+ mbox-names = "rx", "tx";
+
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ reg-names = "debug_messages";
+ reg = <0x00 0x44083000 0x00 0x1000>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <2>;
+ };
+
+ k3_clks: clock-controller {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ chipid@43000014 {
+ compatible = "ti,am654-chipid";
+ reg = <0x00 0x43000014 0x00 0x4>;
+ };
+
+ mcu_ram: sram@41c00000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x41c00000 0x00 0x100000>;
+ ranges = <0x00 0x00 0x41c00000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ wkup_pmx0: pinctrl@4301c000 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c000 0x00 0x178>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_gpio_intr: interrupt-controller@42200000 {
+ compatible = "ti,sci-intr";
+ reg = <0x00 0x42200000 0x00 0x400>;
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <177>;
+ ti,interrupt-ranges = <16 928 16>;
+ };
+
+ mcu_conf: syscon@40f00000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x0 0x40f00000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+ phy_gmii_sel: phy@4040 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x4040 0x4>;
+ #phy-cells = <1>;
+ status = "disabled";

Any reason this is disabled?

+ };
+ };
+
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x200>;
+ interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 397 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x200>;
+ interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+ current-speed = <115200>;
+ clocks = <&k3_clks 149 0>;
+ clock-names = "fclk";
+ power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ wkup_gpio0: gpio@42110000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42110000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <89>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 167 0>;
+ clock-names = "gpio";
+ status = "disabled";
+ };
+
+ wkup_gpio1: gpio@42100000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42100000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <89>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 168 0>;
+ clock-names = "gpio";
+ status = "disabled";
+ };
+
+ wkup_i2c0: i2c@42120000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x42120000 0x00 0x100>;
+ interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 279 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcu_i2c0: i2c@40b00000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x40b00000 0x00 0x100>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 277 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcu_i2c1: i2c@40b10000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x00 0x40b10000 0x00 0x100>;
+ interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 278 2>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcu_mcan0: can@40528000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x40528000 0x00 0x200>,
+ <0x00 0x40500000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 263 6>, <&k3_clks 263 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ mcu_mcan1: can@40568000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x40568000 0x00 0x200>,
+ <0x00 0x40540000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 264 6>, <&k3_clks 264 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ mcu_navss: bus@28380000{
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+ dma-coherent;
+ dma-ranges;
+ ti,sci-dev-id = <323>;
+
+ mcu_ringacc: ringacc@2b800000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <286>;
+ ti,sci-rm-range-gp-rings = <0x1>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <328>;
+ msi-parent = <&main_udmass_inta>;
+ };
+
+ mcu_udmap: dma-controller@285c0000 {
+ compatible = "ti,j721e-navss-mcu-udmap";
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <1>;
+
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <329>;
+ ti,ringacc = <&mcu_ringacc>;
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>; /* TX_HCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>; /* RX_HCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ };
+ };
+
+ mcu_cpsw: ethernet@46000000 {
+ compatible = "ti,j721e-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 63 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&mcu_udmap 0xf000>,
+ <&mcu_udmap 0xf001>,
+ <&mcu_udmap 0xf002>,
+ <&mcu_udmap 0xf003>,
+ <&mcu_udmap 0xf004>,
+ <&mcu_udmap 0xf005>,
+ <&mcu_udmap 0xf006>,
+ <&mcu_udmap 0xf007>,
+ <&mcu_udmap 0x7000>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mcu_cpsw_port1: port@1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ ti,syscon-efuse = <&mcu_conf 0x200>;
+ phys = <&phy_gmii_sel 1>;
+ status = "disabled";
+ };
+ };
+
+ davinci_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x0 0xf00 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 63 0>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ status = "disabled";
+ };
+
+ cpts@3d000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x0 0x3d000 0x0 0x400>;
+ clocks = <&k3_clks 63 3>;
+ clock-names = "cpts";
+ assigned-clocks = <&k3_clks 63 3>; /* CPTS_RFT_CLK */
+ assigned-clock-parents = <&k3_clks 63 5>; /* MAIN_0_HSDIV6_CLK */
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ status = "disabled";

Why is this disabled? Same for mcu_cpsw_port1 above. The parrent node is disabled due
to missing pinmux, that should be enough, the children nodes do not need individually
disabled.

This one also doesn't have a phandle name, so we do not have a way to enable it later
in the board level DT..

+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
new file mode 100644
index 000000000000..637a2a7ed37a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family
+ *
+ * TRM (SPRUJ43 JULY 2022) : http://www.ti.com/lit/zip/spruj52
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+ model = "Texas Instruments K3 J784S4 SoC";
+ compatible = "ti,j784s4";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };

Not needed here.

Andrew

+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1: cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+
+ core2 {
+ cpu = <&cpu6>;
+ };
+
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a72";
+ reg = <0x000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a72";
+ reg = <0x001>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a72";
+ reg = <0x002>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a72";
+ reg = <0x003>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a72";
+ reg = <0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a72";
+ reg = <0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_1>;
+ };
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ next-level-cache = <&msmc_l3>;
+ };
+
+ L2_1: l2-cache1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ next-level-cache = <&msmc_l3>;
+ };
+
+ msmc_l3: l3-cache0 {
+ compatible = "cache";
+ cache-level = <3>;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ psci: psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+ };
+
+ a72_timer0: timer-cl0-cpu0 {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a72-pmu";
+ /* Recommendation from GIC500 TRM Table A.3 */
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cbass_main: bus@100000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+ <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
+ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+ <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+ <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+ <0x00 0x66800000 0x00 0x66800000 0x00 0x0070c000>, /* C71_3 */
+ <0x00 0x67800000 0x00 0x67800000 0x00 0x0070c000>, /* C71_4 */
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+ <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+ <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+ /* MCUSS_WKUP Range */
+ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+ cbass_mcu_wakeup: bus@28380000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+ };
+ };
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j784s4-main.dtsi"
+#include "k3-j784s4-mcu-wakeup.dtsi"