Re: [PATCH 1/2] ASoC: dt-bindings: lpass-va: add npl clock for new VA macro

From: Srinivas Kandagatla
Date: Fri Nov 18 2022 - 01:57:06 EST


Thanks Krzystof,

On 15/11/2022 14:21, Krzysztof Kozlowski wrote:
On 15/11/2022 11:55, Srinivas Kandagatla wrote:
LPASS VA Macro now has soundwire master to deal with access to
analog mic in low power island use cases. This also means that VA macro
now needs to get hold of the npl clock too. Add clock bindings required
for this.

As part of adding this bindings, also update bindings to be able to
specific and associate the clock names specific to the SoC.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
.../bindings/sound/qcom,lpass-va-macro.yaml | 72 ++++++++++++++++---
1 file changed, 64 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
index c36caf90b837..848e34111df1 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -27,16 +27,13 @@ properties:
const: 0
clocks:
- maxItems: 3
+ minItems: 1
+ maxItems: 4
+
clock-names:
- oneOf:
- - items: #for ADSP based platforms
- - const: mclk
- - const: core
- - const: dcodec
- - items: #for ADSP bypass based platforms
- - const: mclk
+ minItems: 1
+ maxItems: 4
clock-output-names:
maxItems: 1
@@ -61,6 +58,65 @@ required:
- reg
- "#sound-dai-cells"
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sc7280-lpass-va-macro
+ then:
+ properties:
+ clocks:
+ minItems: 1

You can skip minItems here.

I have addressed all the comments including this, will send a v2 with these changes.

--srini

+ maxItems: 1
+ clock-names:
+ items:
+ - const: mclk
+ required:
+ - clock-names
+ - clocks

IIUC, all variants require now clocks, so these two lines should be part
of top level "required:".

+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm8250-lpass-va-macro
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: mclk
+ - const: core
+ - const: dcodec
+ required:
+ - clock-names
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-lpass-va-macro
+ - qcom,sm8450-lpass-va-macro
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: mclk
+ - const: npl

How about making it the last clock so the order matches with sm8250?


Best regards,
Krzysztof