Re: [PATCH RFC 1/5] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC

[Lad, Prabhakar]

Hi Geert,

Thank you for the review.

On Thu, Nov 17, 2022 at 10:54 AM Geert Uytterhoeven
<geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Mon, Nov 7, 2022 at 6:53 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Document RZ/G2UL (R9A07G043) IRQC bindings. The RZ/G2UL IRQC block is
> > identical to one found on the RZ/G2L SoC. No driver changes are
> > required as generic compatible string "renesas,rzg2l-irqc" will be
> > used as a fallback.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > ---
> > Note, renesas,r9a07g043u-irqc is added we have slight difference's compared to RZ/Five
> > - G2UL IRQCHIP (hierarchical IRQ domain) -> GIC where as on RZ/Five we have PLIC (chained interrupt
> > domain) -> RISCV INTC
>
> I think this difference is purely a software difference, and abstracted
> in DTS through the interrupt hierarchy.
> Does it have any impact on the bindings?
>
For now I dont know for sure, as I havent started looking into it yet.

> > - On the RZ/Five we have additional registers for IRQC block
>
> Indeed, the NMI/IRQ/TINT "Interruput" Mask Control Registers, thus
> warranting separate compatible values.
>
\o/

> > - On the RZ/Five we have BUS_ERR_INT which needs to be handled by IRQC
>
> Can you please elaborate? I may have missed something, but to me it
> looks like that is exactly the same on RZ/G2UL and on RZ/Five.
>
I completely missed rz/g2ul had this interrupt too.

Cheers,
Prabhakar