Re: [PATCH 3/6] soc: qcom: geni-se: add desc struct to specify clocks from device match data

From: Konrad Dybcio
Date: Wed Nov 16 2022 - 05:44:40 EST




On 16/11/2022 11:21, Neil Armstrong wrote:
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.

This prepares support for the I2C Master Hub variant, by moving
the required clocks list to a new desc struct then passing it through the
compatible match data.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
drivers/soc/qcom/qcom-geni-se.c | 57 +++++++++++++++++++++++++++++++----------
1 file changed, 43 insertions(+), 14 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index a0ceeede450f..f4f54d92a01a 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -81,19 +81,31 @@
*/
#define MAX_CLK_PERF_LEVEL 32
-#define NUM_AHB_CLKS 2
+#define MAX_CLKS 2
/**
* struct geni_wrapper - Data structure to represent the QUP Wrapper Core
* @dev: Device pointer of the QUP wrapper core
* @base: Base address of this instance of QUP wrapper core
- * @ahb_clks: Handle to the primary & secondary AHB clocks
+ * @clks: Handle to the primary & optional secondary AHB clocks
+ * @num_clks: Count of clocks
* @to_core: Core ICC path
*/
struct geni_wrapper {
struct device *dev;
void __iomem *base;
- struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+ struct clk_bulk_data clks[MAX_CLKS];
+ unsigned int num_clks;
+};
+
+/**
+ * struct geni_se_desc - Data structure to represent the QUP Wrapper resources
+ * @clks: Name of the primary & optional secondary AHB clocks
+ * @num_clks: Count of clock names
+ */
+struct geni_se_desc {
+ unsigned int num_clks;
+ const char * const *clks;
};
static const char * const icc_path_names[] = {"qup-core", "qup-config",
@@ -496,8 +508,7 @@ static void geni_se_clks_off(struct geni_se *se)
struct geni_wrapper *wrapper = se->wrapper;
clk_disable_unprepare(se->clk);
- clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
- wrapper->ahb_clks);
+ clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
}
/**
@@ -528,15 +539,13 @@ static int geni_se_clks_on(struct geni_se *se)
int ret;
struct geni_wrapper *wrapper = se->wrapper;
- ret = clk_bulk_prepare_enable(ARRAY_SIZE(wrapper->ahb_clks),
- wrapper->ahb_clks);
+ ret = clk_bulk_prepare_enable(wrapper->num_clks, wrapper->clks);
if (ret)
return ret;
ret = clk_prepare_enable(se->clk);
if (ret)
- clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
- wrapper->ahb_clks);
+ clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
return ret;
}
@@ -887,11 +896,21 @@ static int geni_se_probe(struct platform_device *pdev)
return PTR_ERR(wrapper->base);
if (!has_acpi_companion(&pdev->dev)) {
- wrapper->ahb_clks[0].id = "m-ahb";
- wrapper->ahb_clks[1].id = "s-ahb";
- ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
+ const struct geni_se_desc *desc;
+ int i;
+
+ desc = device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ wrapper->num_clks = min_t(unsigned int, desc->num_clks, MAX_CLKS);
Maybe a warning would be suitable if num mismatch happens?

Other than that,
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>


Konrad
+
+ for (i = 0; i < wrapper->num_clks; ++i)
+ wrapper->clks[i].id = desc->clks[i];
+
+ ret = devm_clk_bulk_get(dev, wrapper->num_clks, wrapper->clks);
if (ret) {
- dev_err(dev, "Err getting AHB clks %d\n", ret);
+ dev_err(dev, "Err getting clks %d\n", ret);
return ret;
}
}
@@ -901,8 +920,18 @@ static int geni_se_probe(struct platform_device *pdev)
return devm_of_platform_populate(dev);
}
+static const char * const qup_clks[] = {
+ "m-ahb",
+ "s-ahb",
+};
+
+static const struct geni_se_desc qup_desc = {
+ .clks = qup_clks,
+ .num_clks = ARRAY_SIZE(qup_clks),
+};
+
static const struct of_device_id geni_se_dt_match[] = {
- { .compatible = "qcom,geni-se-qup", },
+ { .compatible = "qcom,geni-se-qup", .data = &qup_desc },
{}
};
MODULE_DEVICE_TABLE(of, geni_se_dt_match);