Re: [PATCH v2 2/4] clk: imx: imxrt1050: add IMXRT1050_CLK_LCDIF_PIX clock gate

[Jesse Taube]

On 11/15/22 14:32, Giulio Benetti wrote:
> Cc: Jesse Taube <mr.bossman075@xxxxxxxxx>
> Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
> ---
> V1->V2:
> * nothing done
> ---
>   drivers/clk/imx/clk-imxrt1050.c | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
> index 26108e9f7e67..39f77c03b892 100644
> --- a/drivers/clk/imx/clk-imxrt1050.c
> +++ b/drivers/clk/imx/clk-imxrt1050.c
> @@ -141,6 +141,7 @@ static int imxrt1050_clocks_probe(struct platform_device *pdev)
>   	hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
>   	hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
>   	hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x70, 28);
> +	hws[IMXRT1050_CLK_LCDIF_PIX] = imx_clk_hw_gate2("lcdif_pix", "lcdif", ccm_base + 0x74, 10);
I think it makes sense to squash this with PATCH1 because it changes the 
same file. It also will make the change more understandable as I swapped 
the offsets for PIX clock and APB clock accidentally. I'm not sure if 
this is necessary but I think there should be a commit description. 
Otherwise
Acked-by: Jesse Taube <mr.bossman075@xxxxxxxxx>

Thanks,
Jesse Taube
>   	hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6);
>   	hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
>   	imx_check_clk_hws(hws, IMXRT1050_CLK_END);