[PATCH 0/3] iio: adc: stm32: add smart calibration

From: Olivier Moysan
Date: Tue Nov 15 2022 - 05:35:21 EST


Refine offset and linear calibration strategy for STM32MP15 and
STM32MP13 SoCs:

- offset calibration
This calibration depends on factors such as temperature and voltage.
As it is not time consuming, it's worth doing it on each ADC
start, to get the best accuracy. There is no need to save these data.

- linear calibration
This calibration is basically SoC dependent, so it can be done only once.
When this calibration has been performed at boot stage, the ADC kernel
driver can retrieve the calibration data from the ADC registers.
Otherwise, the linear calibration is performed once by the ADC driver.
The backup of these data, allows to restore them on successive ADC starts.

Olivier Moysan (3):
iio: adc: stm32-adc: smart calibration support
iio: adc: stm32-adc: improve calibration error log
iio: adc: stm32-adc: add debugfs to read raw calibration result

drivers/iio/adc/stm32-adc-core.h | 1 +
drivers/iio/adc/stm32-adc.c | 135 ++++++++++++++++++-------------
2 files changed, 78 insertions(+), 58 deletions(-)

--
2.25.1