[PATCH v4] cxl/acpi: Register CXL host ports by bridge device

From: Robert Richter
Date: Mon Nov 14 2022 - 15:20:27 EST


A port of a CXL host bridge links to the bridge's acpi device
(&adev->dev) with its corresponding uport/dport device (uport_dev and
dport_dev respectively). The device is not a direct parent device in
the PCI topology as pdev->dev.parent points to a PCI bridge's (struct
pci_host_bridge) device. The following CXL memory device hierarchy
would be valid for an endpoint once an RCD EP would be enabled (note
this will be done in a later patch):

VH mode:

cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_dev (Type 1, Downstream Port)
\ pci_dev (Type 0, PCI Express Endpoint)
cxl mem device

RCD mode:

cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_host_bridge
\ pci_dev (Type 0, RCiEP)
cxl mem device

In VH mode a downstream port is created by port enumeration and thus
always exists.

Now, in RCD mode the host bridge also already exists but it references
to an ACPI device. A port lookup by the PCI device's parent device
will fail as a direct link to the registered port is missing. The ACPI
device of the bridge must be determined first.

To prevent this, change port registration of a CXL host to use the
bridge device instead. Do this also for the VH case as port topology
will better reflect the PCI topology then.

Signed-off-by: Robert Richter <rrichter@xxxxxxx>
Co-developed-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
drivers/cxl/acpi.c | 35 +++++++++++++++++++----------------
1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index fb9f72813067..71f8bdedd676 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -193,35 +193,34 @@ static int add_host_bridge_uport(struct device *match, void *arg)
{
struct cxl_port *root_port = arg;
struct device *host = root_port->dev.parent;
- struct acpi_device *bridge = to_cxl_host_bridge(host, match);
+ struct acpi_device *hb = to_cxl_host_bridge(host, match);
struct acpi_pci_root *pci_root;
struct cxl_dport *dport;
struct cxl_port *port;
+ struct device *bridge;
int rc;

- if (!bridge)
+ if (!hb)
return 0;

- dport = cxl_find_dport_by_dev(root_port, match);
+ pci_root = acpi_pci_find_root(hb->handle);
+ bridge = pci_root->bus->bridge;
+ dport = cxl_find_dport_by_dev(root_port, bridge);
if (!dport) {
dev_dbg(host, "host bridge expected and not found\n");
return 0;
}

- /*
- * Note that this lookup already succeeded in
- * to_cxl_host_bridge(), so no need to check for failure here
- */
- pci_root = acpi_pci_find_root(bridge->handle);
- rc = devm_cxl_register_pci_bus(host, match, pci_root->bus);
+ rc = devm_cxl_register_pci_bus(host, bridge, pci_root->bus);
if (rc)
return rc;

- port = devm_cxl_add_port(host, match, dport->component_reg_phys, dport);
+ port = devm_cxl_add_port(host, bridge, dport->component_reg_phys,
+ dport);
if (IS_ERR(port))
return PTR_ERR(port);

- dev_info(pci_root->bus->bridge, "host supports CXL\n");
+ dev_info(bridge, "host supports CXL\n");

return 0;
}
@@ -253,18 +252,20 @@ static int cxl_get_chbcr(union acpi_subtable_headers *header, void *arg,
static int add_host_bridge_dport(struct device *match, void *arg)
{
acpi_status status;
+ struct device *bridge;
unsigned long long uid;
struct cxl_dport *dport;
struct cxl_chbs_context ctx;
+ struct acpi_pci_root *pci_root;
struct cxl_port *root_port = arg;
struct device *host = root_port->dev.parent;
- struct acpi_device *bridge = to_cxl_host_bridge(host, match);
+ struct acpi_device *hb = to_cxl_host_bridge(host, match);

- if (!bridge)
+ if (!hb)
return 0;

- status = acpi_evaluate_integer(bridge->handle, METHOD_NAME__UID, NULL,
- &uid);
+ status =
+ acpi_evaluate_integer(hb->handle, METHOD_NAME__UID, NULL, &uid);
if (status != AE_OK) {
dev_err(match, "unable to retrieve _UID\n");
return -ENODEV;
@@ -285,7 +286,9 @@ static int add_host_bridge_dport(struct device *match, void *arg)

dev_dbg(match, "CHBCR found: 0x%08llx\n", (u64)ctx.chbcr);

- dport = devm_cxl_add_dport(root_port, match, uid, ctx.chbcr);
+ pci_root = acpi_pci_find_root(hb->handle);
+ bridge = pci_root->bus->bridge;
+ dport = devm_cxl_add_dport(root_port, bridge, uid, ctx.chbcr);
if (IS_ERR(dport))
return PTR_ERR(dport);

--
2.38.1