[PATCH v2 4/6] arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO

[Nicolas Frattaroli]

This patch enables the PCIe2 on the CM4IO board when paired with
a SOQuartz CM4 System-on-Module board. combphy2 also needs to be
enabled in this case to make the PHY work for this.

Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
---
 .../boot/dts/rockchip/rk3566-soquartz-cm4.dts     | 11 +++++++++++
 arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi | 15 +++++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index e00568a6be5c..263ce40770dd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -30,6 +30,12 @@ vcc_5v: vcc-5v-regulator {
 	};
 };
 
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
 &gmac1 {
 	status = "okay";
 };
@@ -105,6 +111,11 @@ &led_work {
 	status = "okay";
 };
 
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &rgmii_phy1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 1b975822effa..ce7165d7f1a1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -487,6 +487,12 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
@@ -512,6 +518,15 @@ diy_led_enable_h: diy-led-enable-h {
 		};
 	};
 
+	pcie {
+		pcie_clkreq_h: pcie-clkreq-h {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-- 
2.38.1