Re: [PATCH v2 1/2] dt-bindings: iio: addac: add AD74115

[Jonathan Cameron]

> >   
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    description: |
> > > +      Conversion range for ADC conversion 2.
> > > +      0 - 0V to 12V
> > > +      1 - -12V to +12V
> > > +      2 - -2.5V to +2.5V
> > > +      3 - -2.5V to 0V
> > > +      4 - 0V to 2.5V
> > > +      5 - 0V to 0.625V
> > > +      6 - -104mV to +104mV
> > > +      7 - 0V to 12V  
> > 
> > For a lot of similar cases we handle these numerically to give
> > a human readable dts.  Is there a strong reason not to do so here (in mv)
> >   
> 
> I used this approach mostly because it maps dirrectly to register values
> and because it's easier to parse. dts isn't exactly nice at handling
> negative values. I can switch it to mv array if you insist.

We have quite a few existing cases of
adi,[output-]range-microvolt so it would be good to copy that style here.

> 
> >   
> > > +    minimum: 0
> > > +    maximum: 7
> > > +    default: 0
> > > +