Re: [PATCH v4 5/9] dt-bindings: soc: mediatek: convert pwrap documentation

From: Krzysztof Kozlowski
Date: Fri Nov 11 2022 - 09:55:54 EST


On 08/11/2022 19:43, Alexandre Mergnat wrote:
> - Convert soc/mediatek/pwrap.txt to soc/mediatek/mediatek,pwrap.yaml
> - MT8365 SoC has 2 additional clock items and a yaml schema for its PMIC
> - Remove pwrap.txt file
>
> Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/leds/leds-mt6323.txt | 2 +-
> Documentation/devicetree/bindings/mfd/mt6397.txt | 2 +-
> .../bindings/soc/mediatek/mediatek,pwrap.yaml | 158 +++++++++++++++++++++
> .../devicetree/bindings/soc/mediatek/pwrap.txt | 75 ----------
> 4 files changed, 160 insertions(+), 77 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
> index 45bf9f7d85f3..73353692efa1 100644
> --- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
> @@ -9,7 +9,7 @@ MT6323 PMIC hardware.
> For MT6323 MFD bindings see:
> Documentation/devicetree/bindings/mfd/mt6397.txt
> For MediaTek PMIC wrapper bindings see:
> -Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
> +Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
>
> Required properties:
> - compatible : Must be "mediatek,mt6323-led"
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
> index 79aaf21af8e9..3bee4a42555d 100644
> --- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
> It is interfaced to host controller using SPI interface by a proprietary hardware
> called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
> See the following for pwarp node definitions:
> -../soc/mediatek/pwrap.txt
> +../soc/mediatek/mediatek,pwrap.yaml
>
> This document describes the binding for MFD device and its sub module.
>
> diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
> new file mode 100644
> index 000000000000..fe83458b801a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
> @@ -0,0 +1,158 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek PMIC Wrapper
> +
> +maintainers:
> + - Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
> +
> +description: |
> + On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
> + is not directly visible to the CPU, but only through the PMIC wrapper
> + inside the SoC. The communication between the SoC and the PMIC can
> + optionally be encrypted. Also a non standard Dual IO SPI mode can be
> + used to increase speed.
> +
> + IP Pairing
> +
> + On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
> + The signals of these pins are routed over the SPI bus using the pwrap
> + bridge. In the binding description below the properties needed for bridging
> + are marked with "IP Pairing". These are optional on SoCs which do not support
> + IP Pairing
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - mediatek,mt2701-pwrap
> + - mediatek,mt6765-pwrap
> + - mediatek,mt6779-pwrap
> + - mediatek,mt6797-pwrap
> + - mediatek,mt6873-pwrap
> + - mediatek,mt7622-pwrap
> + - mediatek,mt8135-pwrap
> + - mediatek,mt8173-pwrap
> + - mediatek,mt8183-pwrap
> + - mediatek,mt8188-pwrap

Why no mt8195?

> + - mediatek,mt8365-pwrap
> + - mediatek,mt8516-pwrap
> + - items:
> + - enum:
> + - mediatek,mt8186-pwrap
> + - mediatek,mt8195-pwrap
> + - const: syscon
> +
> + reg:
> + minItems: 1
> + items:
> + - description: PMIC wrapper registers (mandatory)

Drop "(mandatory)"

> + - description: IP pairing registers
> +
> + reg-names:
> + minItems: 1
> + items:
> + - const: pwrap
> + - const: pwrap-bridge
> +
> + interrupts:
> + maxItems: 1
> + description: IRQ for pwrap in SOC

Drop description.

> +
> + clocks: true

minItems:2
maxItems: 4

> +
> + clock-names: true

Ditto

> +
> + resets:
> + minItems: 1
> + items:
> + - description: PMIC wrapper reset
> + - description: IP pairing reset
> +
> + reset-names:
> + minItems: 1
> + items:
> + - const: pwrap
> + - const: pwrap-bridge
> +
> + pmic:
> + type: object
> +

Required properties go here.

> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt8365-pwrap
> + then:
> + properties:
> + pmic:
> + $ref: /schemas/mfd/mediatek,mt6357.yaml#
> +
> + clocks:
> + items:
> + - description: SPI bus clock
> + - description: Main module clock
> + - description: System module clock
> + - description: Timer module clock
> + clock-names:
> + items:
> + - const: spi
> + - const: wrap
> + - const: sys
> + - const: tmr
> + else:
> + properties:
> + pmic:
> + description: |
> + List of child nodes that specify the regulators.

This is not correct description.

> + See ../../mfd/mt6397.txt for more details.
> +
> + clocks:
> + items:
> + - description: SPI bus clock
> + - description: Main module clock
> + clock-names:
> + items:
> + - const: spi
> + - const: wrap
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - clocks
> + - clock-names
> +
> +additionalProperties: true

This must be false.

> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/reset/mt8135-resets.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + pwrap@1000f000 {
> + compatible = "mediatek,mt8135-pwrap";
> + reg = <0 0x1000f000 0 0x1000>, <0 0x11017000 0 0x1000>;
> + reg-names = "pwrap", "pwrap-bridge";
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
> + <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;

Align.

> + reset-names = "pwrap", "pwrap-bridge";
> + clocks = <&clk26m>, <&clk26m>;
> + clock-names = "spi", "wrap";
> +
> + pmic {
> + compatible = "mediatek,mt6397";

Messed up indentation.

> + };

Best regards,
Krzysztof