[PATCH V3 1/1] mmc: sdhci: Fix the SD tuning issue that the SDHCI_TRANSFER_MODE is cleared incorrectly

[Charl Liu]

When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
should also be kept

Signed-off-by: Charl Liu <charl.liu@xxxxxxxxxxxxxx>
---
change in V1:
Keeping the SDHCI_TRANSFER_MODE when cmd->opcode == MMC_END_TUNING_BLOCK

change in V2:
add the mmc_op_tuning interface to judge if the opcode is tuning CMD

change in V3:
cancel the redundant code
---
 drivers/mmc/host/sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index fef03de85b99..98ee688de50d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1465,7 +1465,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 		if (host->quirks2 &
 			SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
 			/* must not clear SDHCI_TRANSFER_MODE when tuning */
-			if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
+			if (!mmc_op_tuning(cmd->opcode))
 				sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
 		} else {
 		/* clear Auto CMD settings for no data CMDs */
-- 
2.32.0