[PATCH v4 0/4] Initial SDM670 and Pixel 3a support

[Richard Acayan]

Changes since v3:
 - remove qcom,msm-id and qcom,board-id (4/4)

Changes since v2:
 - remove intc address and size cells (4/4)
 - move apps_rsc label property down (4/4)
 - move properties in intc (4/4)
 - remove leading zeroes in iommus (4/4)
 - change 0x0 to 0 in regs except cpu (4/4)
 - change 0 to 0x0 in memory regs (4/4)
 - convert hex to decimal in rmi4 #cells properties (4/4)

Changes since v1:
 - remove i2c interconnects (4/4)
 - change regulator phandle names (4/4)
 - change regulators node names (4/4)
 - remove clock-output-names from xo-board (4/4)
 - remove vdd-supply from touchscreen (4/4)
 - move clocks to device dts (4/4)
 - reorder pmic nodes, root nodes, and phandle references in dts (4/4)
 - move status properties to bottom of nodes (4/4)
 - accumulate commit message tags (1-3/4)

Do not apply this series yet. It is only for review comments. It can be
applied once the "qcom,sdm670-smmu-500" compatible string gets added (or
now if you don't care about handling an unnecessary quirk).

This adds the device trees and bindings to support the Qualcomm
Snapdragon 670 and Google Pixel 3a. This patch series, specifically the
last patch, depends on:

[PATCH v4 0/3] SDM670 Global Clocks
  https://lore.kernel.org/all/20220914013922.198778-1-mailingradian@xxxxxxxxx/T/
[PATCH v2 0/2] RPMh Support for PM660 and PM660L
  https://lore.kernel.org/all/20220920223331.150635-1-mailingradian@xxxxxxxxx/T/
[PATCH v2 0/2] SDM670 RPMh Clocks
  https://lore.kernel.org/all/20220920223734.151135-1-mailingradian@xxxxxxxxx/T/
[PATCH v2 0/2] SDM670 USB 2.0 support
  https://lore.kernel.org/all/20220922024656.178529-1-mailingradian@xxxxxxxxx/T/
[PATCH 0/2] SDM670 SDHCI support
  https://lore.kernel.org/all/20220923014322.33620-1-mailingradian@xxxxxxxxx/T/
[PATCH v2 0/2] SDM670 Power Domains
  https://lore.kernel.org/all/20221004221130.14076-1-mailingradian@xxxxxxxxx/T/
[PATCH v10 0/3] SDM670 Pin Control Driver
  https://lore.kernel.org/all/20221014001934.4995-1-mailingradian@xxxxxxxxx/T/
[PATCH v6 0/4] SDM670 GPI DMA support
  https://lore.kernel.org/all/20221018005740.23952-1-mailingradian@xxxxxxxxx/T/
[RFC PATCH v2 0/11] iommu/arm-smmu-qcom: Rework Qualcomm SMMU bindings and implementation
  https://lore.kernel.org/linux-arm-msm/20221102184420.534094-1-dmitry.baryshkov@xxxxxxxxxx/T/
[PATCH v4 0/1] iommu: SMMU for SDM670
  https://lore.kernel.org/linux-arm-msm/20221108025847.58352-1-mailingradian@xxxxxxxxx/T/

Richard Acayan (4):
  dt-bindings: arm: cpus: add qcom kryo 360 compatible
  dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
  dt-bindings: firmware: scm: add sdm670 compatible
  arm64: dts: qcom: add sdm670 and pixel 3a device trees

 .../devicetree/bindings/arm/cpus.yaml         |    1 +
 .../devicetree/bindings/arm/qcom.yaml         |    6 +
 .../bindings/firmware/qcom,scm.yaml           |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../boot/dts/qcom/sdm670-google-sargo.dts     |  531 ++++++++
 arch/arm64/boot/dts/qcom/sdm670.dtsi          | 1160 +++++++++++++++++
 6 files changed, 1700 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm670.dtsi

P.S.: Thank you to all the maintainers and reviewers who went through
everything and made helpful comments!

-- 
2.38.1