Re: [PATCH 2/3] arm64: dts: qcom: sm6375: Add SDHCI2

[Krzysztof Kozlowski]

On 09/11/2022 15:26, Konrad Dybcio wrote:
> Configure the second SDHCI bus controller, which usually the
> interface used for SD cards.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6375.dtsi | 82 ++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> index 6adffd927a8e..483202e60cd7 100644
> --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> @@ -540,6 +540,46 @@ tlmm: pinctrl@500000 {
>  			#interrupt-cells = <2>;
>  			#gpio-cells = <2>;
>  
> +			sdc2_off_state: sdc2-off-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			sdc2_on_state: sdc2-on-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +			};
> +
>  			qup_i2c0_default: qup-i2c0-default-state {
>  				pins = "gpio0", "gpio1";
>  				function = "qup00";
> @@ -630,6 +670,48 @@ rpm_msg_ram: sram@45f0000 {
>  			reg = <0 0x045f0000 0 0x7000>;
>  		};
>  
> +		sdhc_2: sdhci@4784000 {

Node name: mmc

> +			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0 0x04784000 0 0x1000>;
> +

Best regards,
Krzysztof