Re: [PATCH v2] usb: add NO_LPM quirk for Realforce 87U Keyboard

[Greg Kroah-Hartman]

On Thu, Oct 27, 2022 at 11:03:42AM +0200, Nicolas Dumazet wrote:
> Before adding this quirk, this (mechanical keyboard) device would not be
> recognized, logging:
> 
>   new full-speed USB device number 56 using xhci_hcd
>   unable to read config index 0 descriptor/start: -32
>   chopping to 0 config(s)
> 
> It would take dozens of plugging/unpuggling cycles for the keyboard to
> be recognized. Keyboard seems to simply work after applying this quirk.
> 
> This issue had been reported by users in two places already ([1], [2])
> but nobody tried upstreaming a patch yet. After testing I believe their
> suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a
> little overkill. I assume this particular combination was tested because
> it had been previously suggested in [3], but only NO_LPM seems
> sufficient for this device.
> 
> [1]: https://qiita.com/float168/items/fed43d540c8e2201b543
> [2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/
> [3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477
> 
> ---
> Changes in v2:
>   - add the entry to the right location (sorting entries by
>     vendor/device id).
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Nicolas Dumazet <ndumazet@xxxxxxxxxx>
> ---

By putting your s-o-b below the --- line, tools will drop it, how did
you test this?

Put the v2 stuff below the --- line, don't add a new one.  See the
thousands of examples on the list for how to do this correctly (as well
as the kernel documentation.)

Can you fix this up and resend a v3 please?

thanks,

greg k-h