[PATCH 12/13] leds: spi-byte: Fix devm vs. non-devm ordering

From: Wang Yufen
Date: Wed Nov 09 2022 - 03:28:52 EST


When non-devm resources are allocated they mustn't be followed by devm
allocations, otherwise it will break the tear down ordering and might
lead to crashes or other bugs during ->remove() stage. Fix this by
wrapping mutex_destroy() call with devm_add_action_or_reset().

Fixes: e9a804d7a428 ("leds: spi-byte: add single byte SPI LED driver")
Signed-off-by: Wang Yufen <wangyufen@xxxxxxxxxx>
Cc: Christian Mauderer <oss@xxxxxxxxxxxxx>
---
drivers/leds/leds-spi-byte.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/leds/leds-spi-byte.c b/drivers/leds/leds-spi-byte.c
index 2bc5c99..a169780 100644
--- a/drivers/leds/leds-spi-byte.c
+++ b/drivers/leds/leds-spi-byte.c
@@ -78,6 +78,11 @@ static int spi_byte_brightness_set_blocking(struct led_classdev *dev,
return ret;
}

+static void spi_byte_mutex_destroy(void *lock)
+{
+ mutex_destroy(lock);
+}
+
static int spi_byte_probe(struct spi_device *spi)
{
struct device_node *child;
@@ -101,6 +106,10 @@ static int spi_byte_probe(struct spi_device *spi)
strlcpy(led->name, name, sizeof(led->name));
led->spi = spi;
mutex_init(&led->mutex);
+ ret = devm_add_action_or_reset(dev, spi_byte_mutex_destroy,
+ &led->mutex);
+ if (ret)
+ return ret;
led->cdef = device_get_match_data(dev);
led->ldev.name = led->name;
led->ldev.brightness = LED_OFF;
@@ -121,25 +130,15 @@ static int spi_byte_probe(struct spi_device *spi)
led->ldev.brightness);

ret = devm_led_classdev_register(&spi->dev, &led->ldev);
- if (ret) {
- mutex_destroy(&led->mutex);
+ if (ret)
return ret;
- }
spi_set_drvdata(spi, led);

return 0;
}

-static void spi_byte_remove(struct spi_device *spi)
-{
- struct spi_byte_led *led = spi_get_drvdata(spi);
-
- mutex_destroy(&led->mutex);
-}
-
static struct spi_driver spi_byte_driver = {
.probe = spi_byte_probe,
- .remove = spi_byte_remove,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = spi_byte_dt_ids,
--
1.8.3.1