Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: align TLMM pin configuration with DT schema

[Konrad Dybcio]

On 08/11/2022 15:23, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>   arch/arm64/boot/dts/qcom/ipq8074.dtsi | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index d3d9e7eb5837..363ccc272cf1 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -317,35 +317,35 @@ tlmm: pinctrl@1000000 {
>   			interrupt-controller;
>   			#interrupt-cells = <0x2>;
>   
> -			serial_4_pins: serial4-pinmux {
> +			serial_4_pins: serial4-state {
>   				pins = "gpio23", "gpio24";
>   				function = "blsp4_uart1";
>   				drive-strength = <8>;
>   				bias-disable;
>   			};
>   
> -			i2c_0_pins: i2c-0-pinmux {
> +			i2c_0_pins: i2c-0-state {
>   				pins = "gpio42", "gpio43";
>   				function = "blsp1_i2c";
>   				drive-strength = <8>;
>   				bias-disable;
>   			};
>   
> -			spi_0_pins: spi-0-pins {
> +			spi_0_pins: spi-0-state {
>   				pins = "gpio38", "gpio39", "gpio40", "gpio41";
>   				function = "blsp0_spi";
>   				drive-strength = <8>;
>   				bias-disable;
>   			};
>   
> -			hsuart_pins: hsuart-pins {
> +			hsuart_pins: hsuart-state {
>   				pins = "gpio46", "gpio47", "gpio48", "gpio49";
>   				function = "blsp2_uart";
>   				drive-strength = <8>;
>   				bias-disable;
>   			};
>   
> -			qpic_pins: qpic-pins {
> +			qpic_pins: qpic-state {
>   				pins = "gpio1", "gpio3", "gpio4",
>   				       "gpio5", "gpio6", "gpio7",
>   				       "gpio8", "gpio10", "gpio11",