[PATCH 10/12] mfd: intel-m10-bmc: Add PMCI driver
From: Ilpo Järvinen
Date: Tue Nov 08 2022 - 09:45:29 EST
Adding an mfd driver for the PMCI-based interface of Intel MAX10 BMC
controller.
Co-developed-by: Tianfei zhang <tianfei.zhang@xxxxxxxxx>
Signed-off-by: Tianfei zhang <tianfei.zhang@xxxxxxxxx>
Co-developed-by: Russ Weight <russell.h.weight@xxxxxxxxx>
Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
drivers/mfd/Kconfig | 12 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-m10-bmc-pmci.c | 154 ++++++++++++++++++
include/linux/mfd/intel-m10-bmc.h | 1 +
5 files changed, 172 insertions(+), 4 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
index 9773925138af..a8ab58035c95 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -1,4 +1,4 @@
-What: /sys/bus/spi/devices/.../bmc_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@xxxxxxxxx>
@@ -6,7 +6,7 @@ Description: Read only. Returns the hardware build version of Intel
MAX10 BMC chip.
Format: "0x%x".
-What: /sys/bus/spi/devices/.../bmcfw_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@xxxxxxxxx>
@@ -14,7 +14,7 @@ Description: Read only. Returns the firmware version of Intel MAX10
BMC chip.
Format: "0x%x".
-What: /sys/bus/spi/devices/.../mac_address
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_address
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@xxxxxxxxx>
@@ -25,7 +25,7 @@ Description: Read only. Returns the first MAC address in a block
space.
Format: "%02x:%02x:%02x:%02x:%02x:%02x".
-What: /sys/bus/spi/devices/.../mac_count
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_count
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@xxxxxxxxx>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a09d4ac60dc7..38d53f6c4d7b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2238,6 +2238,18 @@ config MFD_INTEL_M10_BMC_SPI
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_INTEL_M10_BMC_PMCI
+ tristate "Intel MAX 10 Board Management Controller with PMCI"
+ depends on FPGA_DFL
+ select MFD_INTEL_M10_BMC_CORE
+ select REGMAP_INDIRECT
+ help
+ Support for the Intel MAX 10 board management controller via PMCI.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_RSMU_I2C
tristate "Renesas Synchronization Management Unit with I2C"
depends on I2C && OF
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f32276cdd0c2..7559362cb438 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -275,6 +275,7 @@ obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
intel-m10-bmc-objs := intel-m10-bmc-core.o
obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE) += intel-m10-bmc.o
obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI) += intel-m10-bmc-spi.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) += intel-m10-bmc-pmci.o
obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
diff --git a/drivers/mfd/intel-m10-bmc-pmci.c b/drivers/mfd/intel-m10-bmc-pmci.c
new file mode 100644
index 000000000000..918378a78bdb
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc-pmci.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PMCI-based interface to MAX10 BMC
+ *
+ * Copyright (C) 2020-2022 Intel Corporation, Inc.
+ *
+ */
+
+#include <linux/dfl.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define M10BMC_PMCI_INDIRECT_BASE 0x400
+
+#define M10BMC_PMCI_SYS_BASE 0x0
+#define M10BMC_PMCI_SYS_END 0xfff
+
+#define M10BMC_PMCI_DOORBELL 0x1c0
+#define M10BMC_PMCI_AUTH_RESULT 0x1c4
+
+/* Telemetry registers */
+#define M10BMC_PMCI_TELEM_START 0x400
+#define M10BMC_PMCI_TELEM_END 0x78c
+
+#define M10BMC_PMCI_BUILD_VER 0x0
+#define NIOS2_PMCI_FW_VERSION 0x4
+#define M10BMC_PMCI_MAC_LOW 0x20
+#define M10BMC_PMCI_MAC_HIGH (M10BMC_PMCI_MAC_LOW + 4)
+
+/* Addresses for security related data in FLASH */
+#define PMCI_BMC_REH_ADDR 0x7ffc004
+#define PMCI_BMC_PROG_ADDR 0x7ffc000
+#define PMCI_BMC_PROG_MAGIC 0x5746
+
+#define PMCI_SR_REH_ADDR 0x7ffd004
+#define PMCI_SR_PROG_ADDR 0x7ffd000
+#define PMCI_SR_PROG_MAGIC 0x5253
+
+#define PMCI_PR_REH_ADDR 0x7ffe004
+#define PMCI_PR_PROG_ADDR 0x7ffe000
+#define PMCI_PR_PROG_MAGIC 0x5250
+
+#define PMCI_STAGING_FLASH_COUNT 0x7ff5000
+
+struct pmci_device {
+ void __iomem *base;
+ struct device *dev;
+ struct intel_m10bmc m10bmc;
+};
+
+static const struct regmap_range m10bmc_pmci_regmap_range[] = {
+ regmap_reg_range(M10BMC_PMCI_SYS_BASE, M10BMC_PMCI_SYS_END),
+};
+
+static const struct regmap_access_table m10_access_table = {
+ .yes_ranges = m10bmc_pmci_regmap_range,
+ .n_yes_ranges = ARRAY_SIZE(m10bmc_pmci_regmap_range),
+};
+
+static const struct regmap_indirect_cfg indirect_cfg = {
+ INTEL_M10_REGMAP_INDIRECT_CFG,
+};
+
+static struct regmap_config m10bmc_pmci_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .wr_table = &m10_access_table,
+ .rd_table = &m10_access_table,
+ .max_register = M10BMC_PMCI_SYS_END,
+ .indirect_cfg = &indirect_cfg,
+};
+
+static struct mfd_cell m10bmc_n6000_bmc_subdevs[] = {
+ { .name = "n6000bmc-hwmon" },
+};
+
+static const struct m10bmc_csr_map m10bmc_pmci_csr_map = {
+ .base = M10BMC_PMCI_SYS_BASE,
+ .build_version = M10BMC_PMCI_BUILD_VER,
+ .fw_version = NIOS2_PMCI_FW_VERSION,
+ .mac_low = M10BMC_PMCI_MAC_LOW,
+ .mac_high = M10BMC_PMCI_MAC_HIGH,
+ .doorbell = M10BMC_PMCI_DOORBELL,
+ .auth_result = M10BMC_PMCI_AUTH_RESULT,
+ .bmc_prog_addr = PMCI_BMC_PROG_ADDR,
+ .bmc_reh_addr = PMCI_BMC_REH_ADDR,
+ .bmc_magic = PMCI_BMC_PROG_MAGIC,
+ .sr_prog_addr = PMCI_SR_PROG_ADDR,
+ .sr_reh_addr = PMCI_SR_REH_ADDR,
+ .sr_magic = PMCI_SR_PROG_MAGIC,
+ .pr_prog_addr = PMCI_PR_PROG_ADDR,
+ .pr_reh_addr = PMCI_PR_REH_ADDR,
+ .pr_magic = PMCI_PR_PROG_MAGIC,
+ .rsu_update_counter = PMCI_STAGING_FLASH_COUNT,
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_m10_n6000 = {
+ .type = M10_N6000,
+ .cells = m10bmc_n6000_bmc_subdevs,
+ .n_cells = ARRAY_SIZE(m10bmc_n6000_bmc_subdevs),
+ .csr_map = &m10bmc_pmci_csr_map,
+};
+
+static int pmci_probe(struct dfl_device *ddev)
+{
+ struct device *dev = &ddev->dev;
+ struct pmci_device *pmci;
+
+ pmci = devm_kzalloc(dev, sizeof(*pmci), GFP_KERNEL);
+ if (!pmci)
+ return -ENOMEM;
+
+ pmci->m10bmc.dev = dev;
+ pmci->dev = dev;
+
+ pmci->base = devm_ioremap_resource(dev, &ddev->mmio_res);
+ if (IS_ERR(pmci->base))
+ return PTR_ERR(pmci->base);
+
+ pmci->m10bmc.regmap =
+ devm_regmap_init_indirect(dev,
+ pmci->base + M10BMC_PMCI_INDIRECT_BASE,
+ &m10bmc_pmci_regmap_config);
+ if (IS_ERR(pmci->m10bmc.regmap))
+ return PTR_ERR(pmci->m10bmc.regmap);
+
+ return m10bmc_dev_init(&pmci->m10bmc, &m10bmc_m10_n6000);
+}
+
+#define FME_FEATURE_ID_PMCI_BMC 0x12
+
+static const struct dfl_device_id pmci_ids[] = {
+ { FME_ID, FME_FEATURE_ID_PMCI_BMC },
+ { }
+};
+MODULE_DEVICE_TABLE(dfl, pmci_ids);
+
+static struct dfl_driver pmci_driver = {
+ .drv = {
+ .name = "intel-m10-bmc",
+ .dev_groups = m10bmc_dev_groups,
+ },
+ .id_table = pmci_ids,
+ .probe = pmci_probe,
+};
+
+module_dfl_driver(pmci_driver);
+
+MODULE_DESCRIPTION("MAX10 BMC PMCI-based interface");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 1b907c1a176f..90f2a691ef46 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -13,6 +13,7 @@ enum m10bmc_type {
M10_N3000,
M10_D5005,
M10_N5010,
+ M10_N6000,
};
#define INTEL_M10_REGMAP_INDIRECT_CFG \
--
2.30.2