Re: [PATCH v2 1/2] arm64: dts: qcom: Fully describe fingerprint node on Herobrine

[Doug Anderson]

Hi,

On Mon, Nov 7, 2022 at 11:15 AM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Update the fingerprint node on Herobrine to match the fingerprint DT
> binding. This will allow us to drive the reset and boot gpios from the
> driver when it is re-attached after flashing. We'll also be able to boot
> the fingerprint processor if the BIOS isn't doing it for us.
>
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Cc: Alexandru M Stan <amstan@xxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)

>From Bjorn's recent comment [1], I think your subject needs modification to:

   arm64: dts: qcom: sc7280: Fully describe fingerprint node on Herobrine

Other than that this seems fine and is a better description of hardware, so:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

I guess we're still leaving gpio77 alone (AKA not describing it in the
fingerprint regulator)?

[1] https://lore.kernel.org/r/20221017224853.stuy5qeqxjxntob4@xxxxxxxxxxx/