Re: [PATCH v4 00/13] Support more parts in LTC2983

[Jonathan Cameron]

On Thu,  3 Nov 2022 15:00:28 +0200
Cosmin Tanislav <demonsingur@xxxxxxxxx> wrote:

> Add support for the following parts:
>  * LTC2984
>  * LTC2986
>  * LTM2985
> 
> The LTC2984 is a variant of the LTC2983 with EEPROM.
> The LTC2986 is a variant of the LTC2983 with only 10 channels,
> EEPROM and support for active analog temperature sensors.
> The LTM2985 is software-compatible with the LTC2986.
> 
> Also, make bulk write buffer DMA-safe.
> Besides that, refine the binding.
Replying at least partly so I can see I already looked at this...

Looks good to me.  Will pick up once DT bindings maintainers are
happy.

Thanks,

Jonathan

> 
> V1 -> V2:
>  * add Fixes tag
>  * add patch that fixes the regmap_bulk_write() call with stack allocated
>    buffer
>  * add patch that refines the binding in preperation for adding new
>    parts support to it
>  * do not use stack allocated buffer for writing the EEPROM key
> 
> V2 -> V3:
>  * drop minItems if equal to maxItems
>  * drop adi,single-ended conditions because of recent dtschema
>    restrictions (even though they're valid in jsonschema and the last
>    dtschema tag)
>  * drop "allocate iio channels once" patch since it's been picked as a fix
> 
> V3 -> V4:
>   * add pipe for 'adi,mux-delay-config-us' description
>   * add pipe for 'adi,rtd-curve' description
>   * keep newlines after descriptions
>   * move 'adi,current-rotate' to conditional
>   * put 'adi,custom-steinhart' in the original place
>   * keep 'minItems' for 'adi,custom-steinhart'
>   * override 'enum' to forbid auto-range in 'adi,excitation-current-nanoamp'
>     when using custom thermistors
>   * split refine patch into multiple patches
>     - use generic node name in example
>     - describe broken mux delay property
>     - refine descriptions
>     - change default excitation for custom thermistors
>     - require 4 wire rtd for current rotate
>     - require custom sensor tables
>     - describe matrix items
>     - remove qutations from phandle ref
>     - use hex for sensor address
>     - add default values
> 
> Cosmin Tanislav (13):
>   iio: temperature: ltc2983: make bulk write buffer DMA-safe
>   dt-bindings: iio: temperature: ltc2983: add default values
>   dt-bindings: iio: temperature: ltc2983: use hex for sensor address
>   dt-bindings: iio: temperature: ltc2983: remove qutations from phandle
>     ref
>   dt-bindings: iio: temperature: ltc2983: describe matrix items
>   dt-bindings: iio: temperature: ltc2983: require custom sensor tables
>   dt-bindings: iio: temperature: ltc2983: require 4 wire rtd for current
>     rotate
>   dt-bindings: iio: temperature: ltc2983: change default excitation for
>     custom thermistors
>   dt-bindings: iio: temperature: ltc2983: refine descriptions
>   dt-bindings: iio: temperature: ltc2983: describe broken mux delay
>     property
>   dt-bindings: iio: temperature: ltc2983: use generic node name in
>     example
>   dt-bindings: iio: temperature: ltc2983: support more parts
>   iio: temperature: ltc2983: support more parts
> 
>  .../bindings/iio/temperature/adi,ltc2983.yaml | 335 +++++++++++-------
>  drivers/iio/temperature/ltc2983.c             | 193 +++++++++-
>  2 files changed, 389 insertions(+), 139 deletions(-)
>