[PATCH v2 1/3] arm64: dts: qcom: msm8916-alcatel-idol347: Add GPIOs -state suffix

[Vincent Knecht]

Add -state suffix to GPIOs states node names as required by dt-bindings.

Signed-off-by: Vincent Knecht <vincent.knecht@xxxxxxxxxx>
---
 .../boot/dts/qcom/msm8916-alcatel-idol347.dts      | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 3dc9619fde6e..668f8ff53229 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -260,7 +260,7 @@ l18 {
 };
 
 &msmgpio {
-	accel_int_default: accel-int-default {
+	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
 		function = "gpio";
 
@@ -268,7 +268,7 @@ accel_int_default: accel-int-default {
 		bias-disable;
 	};
 
-	gpio_keys_default: gpio-keys-default {
+	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
 		function = "gpio";
 
@@ -276,7 +276,7 @@ gpio_keys_default: gpio-keys-default {
 		bias-pull-up;
 	};
 
-	gyro_int_default: gyro-int-default {
+	gyro_int_default: gyro-int-default-state {
 		pins = "gpio97", "gpio98";
 		function = "gpio";
 
@@ -284,7 +284,7 @@ gyro_int_default: gyro-int-default {
 		bias-disable;
 	};
 
-	mag_reset_default: mag-reset-default {
+	mag_reset_default: mag-reset-default-state {
 		pins = "gpio8";
 		function = "gpio";
 
@@ -292,7 +292,7 @@ mag_reset_default: mag-reset-default {
 		bias-disable;
 	};
 
-	proximity_int_default: proximity-int-default {
+	proximity_int_default: proximity-int-default-state {
 		pins = "gpio12";
 		function = "gpio";
 
@@ -300,7 +300,7 @@ proximity_int_default: proximity-int-default {
 		bias-pull-up;
 	};
 
-	ts_int_reset_default: ts-int-reset-default {
+	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
 
@@ -308,7 +308,7 @@ ts_int_reset_default: ts-int-reset-default {
 		bias-disable;
 	};
 
-	usb_id_default: usb-id-default {
+	usb_id_default: usb-id-default-state {
 		pins = "gpio69";
 		function = "gpio";
 
-- 
2.38.1