Re: [PATCH V2 03/15] arm64: dts: imx8mp-evk: fix BUCK/LDO voltage

From: Peng Fan
Date: Thu Nov 03 2022 - 06:23:02 EST




On 10/28/2022 10:53 PM, Marco Felsch wrote:
On 22-10-24, Peng Fan (OSS) wrote:
From: Peng Fan <peng.fan@xxxxxxx>

Per PCA9450C datasheet, the voltage range as below:
BUCK1 0.6 - 2.1875
BUCK2 0.6 - 2.1875
BUCK4 0.6 - 3.4
BUCK5 0.6 - 3.4
BUCK6 0.6 - 3.4

LDO1 1.6-1.9, 3.0-3.3
LDO2 0.8 – 1.15
LDO3 0.8 - 3.3
LDO4 0.8 - 3.3
LDO5 1.8 - 3.3

Currently we set the board voltage range same as PMIC regulator
range.

We did not therefore you aligned it. Also are you sure that this will
not damage the boards since you're lowering the min-voltage and raising
the max. voltage? According the schematic, BUCK1 is for VDD_SOC which is
min. 0.805V and max. 1.0V. After you're change someone could set it to
2.1875V. Same applies to BUCK2 which is for VDD_ARM and should be within
min. 0.805V and max. 1.05V.

You are right. But I think DVFS already limit it.

I am not sure very sure, let me drop this patch for now. I need confirm
with HW team.

Thanks,
Peng.


Regards,
Marco

Also add LDO[2,4] in this patch

Fixes: 5497bc2a2bff ("arm64: dts: imx8mp-evk: Add PMIC device")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 44 +++++++++++++-------
1 file changed, 30 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index b4c1ef2559f2..a4cddc5a8620 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -248,8 +248,8 @@ pmic@25 {
regulators {
BUCK1 {
regulator-name = "BUCK1";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
@@ -257,8 +257,8 @@ BUCK1 {
reg_arm: BUCK2 {
regulator-name = "BUCK2";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1025000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
@@ -268,40 +268,56 @@ reg_arm: BUCK2 {
BUCK4 {
regulator-name = "BUCK4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3600000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
BUCK5 {
regulator-name = "BUCK5";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
BUCK6 {
regulator-name = "BUCK6";
- regulator-min-microvolt = <1045000>;
- regulator-max-microvolt = <1155000>;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-name = "LDO3";
- regulator-min-microvolt = <1710000>;
- regulator-max-microvolt = <1890000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
--
2.37.1