Re: [PATCH v3 4/5] cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states

[Viresh Kumar]

On 24-10-22, 13:39, Hector Martin wrote:
> diff --git a/drivers/cpufreq/apple-soc-cpufreq.c b/drivers/cpufreq/apple-soc-cpufreq.c
> +struct apple_soc_cpufreq_info {
> +	u64 max_pstate;
> +	u64 cur_pstate_mask;
> +	u64 cur_pstate_shift;
> +};
> +
> +struct apple_cpu_priv {
> +	struct device *cpu_dev;
> +	void __iomem *reg_base;
> +	const struct apple_soc_cpufreq_info *info;
> +};
> +
> +static struct cpufreq_driver apple_soc_cpufreq_driver;
> +
> +const struct apple_soc_cpufreq_info soc_t8103_info = {

static ? For other instances too.

> +	.max_pstate = 15,
> +	.cur_pstate_mask = APPLE_DVFS_STATUS_CUR_PS_T8103,
> +	.cur_pstate_shift = APPLE_DVFS_STATUS_CUR_PS_SHIFT_T8103,
> +};
> +
> +const struct apple_soc_cpufreq_info soc_t8112_info = {
> +	.max_pstate = 31,
> +	.cur_pstate_mask = APPLE_DVFS_STATUS_CUR_PS_T8112,
> +	.cur_pstate_shift = APPLE_DVFS_STATUS_CUR_PS_SHIFT_T8112,
> +};
> +
> +const struct apple_soc_cpufreq_info soc_default_info = {
> +	.max_pstate = 15,
> +	.cur_pstate_mask = 0, /* fallback */
> +};
> +
> +static const struct of_device_id apple_soc_cpufreq_of_match[] = {
> +	{
> +		.compatible = "apple,t8103-cluster-cpufreq",
> +		.data = &soc_t8103_info,
> +	},
> +	{

Isn't the preferred way for this is "}, {" instead ?

I couldn't find this in Coding Guidelines, but somehow remember that
to be the preferred format.

> +		.compatible = "apple,t8112-cluster-cpufreq",
> +		.data = &soc_t8112_info,
> +	},
> +	{
> +		.compatible = "apple,cluster-cpufreq",
> +		.data = &soc_default_info,
> +	},
> +	{}
> +};
> +
> +static unsigned int apple_soc_cpufreq_get_rate(unsigned int cpu)
> +{
> +	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
> +	struct apple_cpu_priv *priv = policy->driver_data;
> +	unsigned int pstate;
> +	unsigned int i;

Merge these two ?

> +
> +	if (priv->info->cur_pstate_mask) {
> +		u64 reg = readq_relaxed(priv->reg_base + APPLE_DVFS_STATUS);
> +
> +		pstate = (reg & priv->info->cur_pstate_mask) >>  priv->info->cur_pstate_shift;
> +	} else {
> +		/*
> +		 * For the fallback case we might not know the layout of DVFS_STATUS,
> +		 * so just use the command register value (which ignores boost limitations).
> +		 */
> +		u64 reg = readq_relaxed(priv->reg_base + APPLE_DVFS_CMD);
> +
> +		pstate = FIELD_GET(APPLE_DVFS_CMD_PS1, reg);
> +	}
> +
> +	for (i = 0; policy->freq_table[i].frequency != CPUFREQ_TABLE_END; i++)

You may want to use, cpufreq_for_each_valid_entry(), or some other
generic iterator here.

> +		if (policy->freq_table[i].driver_data == pstate)
> +			return policy->freq_table[i].frequency;
> +
> +	dev_err(priv->cpu_dev, "could not find frequency for pstate %d\n",
> +		pstate);
> +	return 0;
> +}
> +
> +static int apple_soc_cpufreq_set_target(struct cpufreq_policy *policy,
> +					unsigned int index)
> +{
> +	struct apple_cpu_priv *priv = policy->driver_data;
> +	unsigned int pstate = policy->freq_table[index].driver_data;
> +	u64 reg;
> +
> +	/* Fallback for newer SoCs */
> +	if (index > priv->info->max_pstate)
> +		index = priv->info->max_pstate;
> +
> +	if (readq_poll_timeout_atomic(priv->reg_base + APPLE_DVFS_CMD, reg,
> +				      !(reg & APPLE_DVFS_CMD_BUSY), 2,
> +				      APPLE_DVFS_TRANSITION_TIMEOUT)) {
> +		return -EIO;
> +	}
> +
> +	reg &= ~(APPLE_DVFS_CMD_PS1 | APPLE_DVFS_CMD_PS2);
> +	reg |= FIELD_PREP(APPLE_DVFS_CMD_PS1, pstate);
> +	reg |= FIELD_PREP(APPLE_DVFS_CMD_PS2, pstate);
> +	reg |= APPLE_DVFS_CMD_SET;
> +
> +	writeq_relaxed(reg, priv->reg_base + APPLE_DVFS_CMD);
> +
> +	return 0;
> +}
> +
> +static unsigned int apple_soc_cpufreq_fast_switch(struct cpufreq_policy *policy,
> +						  unsigned int target_freq)
> +{
> +	if (apple_soc_cpufreq_set_target(policy, policy->cached_resolved_idx) < 0)
> +		return 0;
> +
> +	return policy->freq_table[policy->cached_resolved_idx].frequency;
> +}
> +
> +static int apple_soc_cpufreq_find_cluster(struct cpufreq_policy *policy,
> +					  void __iomem **reg_base,
> +					  const struct apple_soc_cpufreq_info **info)
> +{
> +	struct of_phandle_args args;
> +	const struct of_device_id *match;
> +	int ret = 0;
> +
> +	ret = of_perf_domain_get_sharing_cpumask(policy->cpu, "performance-domains",
> +						 "#performance-domain-cells",
> +						 policy->cpus, &args);
> +	if (ret < 0)
> +		return ret;
> +
> +	match = of_match_node(apple_soc_cpufreq_of_match, args.np);
> +	of_node_put(args.np);
> +	if (!match)
> +		return -ENODEV;
> +
> +	*info = match->data;
> +
> +	*reg_base = of_iomap(args.np, 0);
> +	if (IS_ERR(*reg_base))
> +		return PTR_ERR(*reg_base);
> +
> +	return 0;
> +}
> +
> +static struct freq_attr *apple_soc_cpufreq_hw_attr[] = {
> +	&cpufreq_freq_attr_scaling_available_freqs,
> +	NULL,
> +	NULL,
> +};
> +
> +static int apple_soc_cpufreq_init(struct cpufreq_policy *policy)
> +{
> +	int ret, i;
> +	unsigned int transition_latency;
> +	void __iomem *reg_base;
> +	struct device *cpu_dev;
> +	struct apple_cpu_priv *priv;
> +	const struct apple_soc_cpufreq_info *info;
> +	struct cpufreq_frequency_table *freq_table;
> +
> +	cpu_dev = get_cpu_device(policy->cpu);
> +	if (!cpu_dev) {
> +		pr_err("failed to get cpu%d device\n", policy->cpu);
> +		return -ENODEV;
> +	}
> +
> +	ret = dev_pm_opp_of_add_table(cpu_dev);
> +	if (ret < 0) {
> +		dev_err(cpu_dev, "%s: failed to add OPP table: %d\n", __func__, ret);
> +		return ret;
> +	}
> +
> +	ret = apple_soc_cpufreq_find_cluster(policy, &reg_base, &info);
> +	if (ret) {
> +		dev_err(cpu_dev, "%s: failed to get cluster info: %d\n", __func__, ret);
> +		return ret;
> +	}
> +
> +	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);

Why do you need this ? The OPP core should be able to find this
information by itself in your case AFAIU. The OPP core will refer
"operating-points-v2 = <&pcluster_opp>" and find that the cores are
related.

> +	if (ret) {
> +		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret);
> +		goto out_iounmap;
> +	}
> +
> +	ret = dev_pm_opp_get_opp_count(cpu_dev);
> +	if (ret <= 0) {
> +		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");

Why would this happen in your case ?

> +		ret = -EPROBE_DEFER;
> +		goto out_free_opp;
> +	}
> +
> +	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> +	if (!priv) {
> +		ret = -ENOMEM;
> +		goto out_free_opp;
> +	}
> +
> +	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
> +	if (ret) {
> +		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
> +		goto out_free_priv;
> +	}
> +
> +	/* Get OPP levels (p-state indexes) and stash them in driver_data */
> +	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
> +		unsigned long rate = freq_table[i].frequency * 1000;
> +		struct dev_pm_opp *opp = dev_pm_opp_find_freq_floor(cpu_dev, &rate);

Shouldn't you use dev_pm_opp_find_freq_exact() here ?

-- 
viresh