[PATCH 5.19 638/717] ARM: dts: imx6sx-udoo-neo: dont use multiple blank lines

From: Greg Kroah-Hartman
Date: Sat Oct 22 2022 - 04:42:29 EST


From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>

[ Upstream commit fd2dd7077c7498765e7326c1b7f34bde85f1a975 ]

This fixes the following warning:

arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple
blank lines

While at it, use tabs indent for some pinctrl entries.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 35861bbea94e..c84ea1fac5e9 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -226,7 +226,7 @@
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
- <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
+ <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
};

pinctrl_enet1: enet1grp {
@@ -306,7 +306,6 @@
>;
};

-
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
@@ -347,24 +346,23 @@

pinctrl_otg1_reg: otg1grp {
fsl,pins =
- <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
+ <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
};

-
pinctrl_otg2_reg: otg2grp {
fsl,pins =
- <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
+ <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
};

pinctrl_usb_otg1: usbotg1grp {
fsl,pins =
- <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
- <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
+ <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
+ <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
};

pinctrl_usb_otg2: usbot2ggrp {
fsl,pins =
- <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
+ <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
};

pinctrl_usdhc2: usdhc2grp {
--
2.35.1