[PATCH 5.19 035/717] i2c: designware: Fix handling of real but unexpected device interrupts

From: Greg Kroah-Hartman
Date: Sat Oct 22 2022 - 04:40:40 EST


From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>

commit 301c8f5c32c8fb79c67539bc23972dc3ef48024c upstream.

Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").

I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:

- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.

My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.

I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).

Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.

Fixes: c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@xxxxxxxxx>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@xxxxxxxxxxxxxxx # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-core.h | 7 +++++--
drivers/i2c/busses/i2c-designware-master.c | 13 +++++++++++++
2 files changed, 18 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -126,8 +126,9 @@
* status codes
*/
#define STATUS_IDLE 0x0
-#define STATUS_WRITE_IN_PROGRESS 0x1
-#define STATUS_READ_IN_PROGRESS 0x2
+#define STATUS_ACTIVE 0x1
+#define STATUS_WRITE_IN_PROGRESS 0x2
+#define STATUS_READ_IN_PROGRESS 0x4

/*
* operation modes
@@ -334,12 +335,14 @@ void i2c_dw_disable_int(struct dw_i2c_de

static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
{
+ dev->status |= STATUS_ACTIVE;
regmap_write(dev->map, DW_IC_ENABLE, 1);
}

static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
{
regmap_write(dev->map, DW_IC_ENABLE, 0);
+ dev->status &= ~STATUS_ACTIVE;
}

void __i2c_dw_disable(struct dw_i2c_dev *dev);
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -716,6 +716,19 @@ static int i2c_dw_irq_handler_master(str
u32 stat;

stat = i2c_dw_read_clear_intrbits(dev);
+
+ if (!(dev->status & STATUS_ACTIVE)) {
+ /*
+ * Unexpected interrupt in driver point of view. State
+ * variables are either unset or stale so acknowledge and
+ * disable interrupts for suppressing further interrupts if
+ * interrupt really came from this HW (E.g. firmware has left
+ * the HW active).
+ */
+ regmap_write(dev->map, DW_IC_INTR_MASK, 0);
+ return 0;
+ }
+
if (stat & DW_IC_INTR_TX_ABRT) {
dev->cmd_err |= DW_IC_ERR_TX_ABRT;
dev->status = STATUS_IDLE;