[PATCH v4 1/3] arm64: dts: qcom: sc7180-trogdor-homestar: fully configure secondary I2S pins

From: Krzysztof Kozlowski
Date: Thu Oct 20 2022 - 18:51:50 EST


The Trogdor Homestar DTSI adds additional GPIO52 pin to secondary I2S pins
("sec_mi2s_active") and configures it to "mi2s_1" function.

The Trogdor DTSI (which is included by Homestar) configures drive
strength and bias for all "sec_mi2s_active" pins, thus the intention was
to apply this configuration also to GPIO52 on Homestar.

Reported-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Fixes: be0416a3f917 ("arm64: dts: qcom: Add sc7180-trogdor-homestar")
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

---

Changes since v3:
1. None

Changes since v2:
1. Add tags.

Changes since v1:
1. New patch

Not tested on hardware.

Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 7fcff4eddd3a..8264b8d5e778 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -194,6 +194,12 @@ pinmux {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
function = "mi2s_1";
};
+
+ pinconf {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};

&ts_reset_l {
--
2.34.1