Re: [PATCH 6.0 000/862] 6.0.3-rc1 review
From: Naresh Kamboju
Date: Thu Oct 20 2022 - 03:32:09 EST
On Wed, 19 Oct 2022 at 14:08, Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> This is the start of the stable review cycle for the 6.0.3 release.
> There are 862 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 21 Oct 2022 08:30:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.0.3-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.0.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.
A list of kernel warning / BUGs/ oops / invalid opcode are coming from
mainline kernel.
Tested-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>
NOTE:
Following kernel warning noticed on arm64 Qcom db410c device while
booting with kselftest merge configs. This is reported on mainline [1] & [2].
[ 29.638854] qcom-camss: probe of 1b0ac00.camss failed with error -17
[ 29.772896] ------------[ cut here ]------------
[ 29.773376] list_add corruption. prev->next should be next
(ffff000004771300), but was 0000000000000000. (prev=ffff000010c13e00).
[ 29.777423] WARNING: CPU: 1 PID: 283 at lib/list_debug.c:30
__list_add_valid+0xdc/0x110
[ 29.784013] NET: Registered PF_QIPCRTR protocol family
[ 29.788398] Modules linked in: qrtr(+) rtc_pm8xxx(+) qcom_pon(+)
qcom_spmi_vadc(+) qcom_vadc_common qcom_q6v5_mss(+) qcom_pil_info
qcom_q6v5 qcom_sysmon qcom_camss qcom_common videobuf2_dma_sg
qcom_glink_smem qmi_helpers venus_core(+) v4l2_fwnode qcom_stats
gpu_sched v4l2_async v4l2_mem2mem drm_dp_aux_bus qnoc_msm8916 qcom_rng
mdt_loader videobuf2_memops videobuf2_v4l2 drm_display_helper
i2c_qcom_cci videobuf2_common icc_smd_rpm display_connector
drm_kms_helper rmtfs_mem socinfo fuse drm
[ 29.823494] CPU: 1 PID: 283 Comm: systemd-udevd Not tainted 6.0.2 #1
[ 29.844890] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 29.851234] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 29.857919] pc : __list_add_valid+0xdc/0x110
[ 29.864544] lr : __list_add_valid+0xdc/0x110
ref:
[1 ] https://lore.kernel.org/all/CA+G9fYuB1-qmObe3L0A0oUDXXaWa=-UxOEGtEWWJ-=_wc791Uw@xxxxxxxxxxxxxx/
[2] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.0.y/build/v6.0.2/testrun/12505842/suite/log-parser-test/test/check-kernel-exception/log
Following warning noticed on arm64 Qcom db845c device while booting with the
Kselftest merge configs enabled.
[ 20.438279] ============================================
[ 20.443648] WARNING: possible recursive locking detected
[ 20.449018] 6.0.2 #1 Not tainted
[ 20.452283] --------------------------------------------
[ 20.457649] kworker/u16:1/11 is trying to acquire lock:
[ 20.462927] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 20.470748] ffff6ca7c8e428f8 (&irq_desc_lock_class){-.-.}-{2:2},
at: __irq_get_desc_lock+0x64/0xac
[ 20.479825]
[ 20.479825] but task is already holding lock:
[ 20.485717] ffff6ca7cb75c0f8 (&irq_desc_lock_class){-.-.}-{2:2},
at: __irq_get_desc_lock+0x64/0xac
[ 20.494777]
[ 20.494777] other info that might help us debug this:
[ 20.501372] Possible unsafe locking scenario:
[ 20.501372]
[ 20.507351] CPU0
[ 20.509834] ----
[ 20.512314] lock(&irq_desc_lock_class);
[ 20.516374] lock(&irq_desc_lock_class);
[ 20.520448]
[ 20.520448] *** DEADLOCK ***
[3] https://lore.kernel.org/all/CA+G9fYui6--jhN1CFH6fXNK81sHNYgosTs2hyybFqPxFRvndpg@xxxxxxxxxxxxxx/
The following invalid opcode found while running selftests: memfd:
run_hugetlbfs_test.sh on i386 with kselftest configs enabled [4] & [5].
# selftests: memfd: run_hugetlbfs_test.sh
[ 75.841946] run_hugetlbfs_t (1296): drop_caches: 3
[ 75.890473] invalid opcode: 0000 [#1] PREEMPT SMP
[ 75.895185] CPU: 1 PID: 1300 Comm: memfd_test Tainted: G
N 6.0.3-rc1 #1
[ 75.903185] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.5 11/26/2020
[ 75.910576] EIP: hugetlb_file_setup.cold+0x0/0x33
[ 75.915312] Code: b8 ea ff ff ff e9 52 8e 26 ff 0f 0b c7 04 24 70
75 63 d6 e8 a7 4a ff ff b8 ea ff ff ff e9 57 97 26 ff 0f 0b 0f 0b 0f
0b 0f 0b <0f> 0b 64 a1 58 b8 bd d6 c6 05 bd c0 a6 d6 01 8b 90 ec 03 00
00 05
[ 75.934053] EAX: c5360dd0 EBX: 00000000 ECX: 00000020 EDX: 00000000
[ 75.940311] ESI: 80000004 EDI: 00000005 EBP: c5405ea0 ESP: c5405e80
[ 75.946620] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010212
[ 75.953399] CR0: 80050033 CR2: 00000000 CR3: 06405000 CR4: 003506d0
[ 75.959665] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 75.965920] DR6: fffe0ff0 DR7: 00000400
[ 75.969753] Call Trace:
[ 75.972199] __ia32_sys_memfd_create+0x196/0x220
[ 75.976816] __do_fast_syscall_32+0x77/0xd0
[ 75.981008] do_fast_syscall_32+0x32/0x70
[ 75.985023] do_SYSENTER_32+0x15/0x20
[ 75.988680] entry_SYSENTER_32+0x98/0xf6
[ 75.992605] EIP: 0xb7f31549
[ 75.995399] Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01
10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f
34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90
8d 76
[ 76.014144] EAX: ffffffda EBX: 0804b486 ECX: 80000004 EDX: 080493de
[ 76.020410] ESI: b7d10220 EDI: b7e068f0 EBP: bffad738 ESP: bffad6cc
[ 76.026668] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296
[ 76.033455] Modules linked in: x86_pkg_temp_thermal fuse configfs
[last unloaded: test_strscpy(N)]
[ 76.042444] ---[ end trace 0000000000000000 ]---
[ 76.047070] EIP: hugetlb_file_setup.cold+0x0/0x33
[ 76.051777] Code: b8 ea ff ff ff e9 52 8e 26 ff 0f 0b c7 04 24 70
75 63 d6 e8 a7 4a ff ff b8 ea ff ff ff e9 57 97 26 ff 0f 0b 0f 0b 0f
0b 0f 0b <0f> 0b 64 a1 58 b8 bd d6 c6 05 bd c0 a6 d6 01 8b 90 ec 03 00
00 05
[ 76.070550] EAX: c5360dd0 EBX: 00000000 ECX: 00000020 EDX: 00000000
[ 76.076841] ESI: 80000004 EDI: 00000005 EBP: c5405ea0 ESP: c5405e80
[ 76.083133] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010212
[ 76.089945] CR0: 80050033 CR2: 00000000 CR3: 06405000 CR4: 003506d0
[ 76.096211] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 76.102483] DR6: fffe0ff0 DR7: 00000400
# ./run_hugetlbfs_test.sh: line 60: 1300 Segmentation fault
./memfd_test hugetlbfs
# opening: ./mnt/memfd
# fuse: DONE
ok 3 selftests: memfd: run_hugetlbfs_test.sh
[4] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.0.y/build/v6.0-916-g844297340351/testrun/12536148/suite/log-parser-test/tests/
[5] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.0.y/build/v6.0-916-g844297340351/testrun/12536148/suite/log-parser-test/test/check-kernel-invalid-opcode/log
While running perf test cases on qemu_x86_64 this kernel BUG noticed [6].
unsupp '/usr/libexec/perf-core/tests/attr/test-record-branch-filter-ind_call'
running '/usr/libexec/perf-core/tests/attr/test-record-group'
[ 204.124863] BUG: kernel NULL pointer dereference, address: 0000000000000198
[ 204.125878] #PF: supervisor read access in kernel mode
[ 204.126482] #PF: error_code(0x0000) - not-present page
[ 204.127127] PGD 0 P4D 0
[ 204.127435] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 204.127939] CPU: 3 PID: 574 Comm: perf-exec Not tainted 6.0.3-rc1 #1
[ 204.128711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.12.0-1 04/01/2014
[ 204.129619] RIP: 0010:x86_pmu_enable_event+0x43/0x130
[6] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.0.y/build/v6.0-916-g844297340351/testrun/12536939/suite/log-parser-test/test/check-kernel-bug/log
Following kernel crash log noticed while running selftests: net: pmtu.sh on
x15 device [7] with kselftest merge configs enabled.
# selftests: net: pmtu.sh
...
# TEST: IPv4 over vxlan6: PMTU exceptions [ OK ]
[ 169.299682] 8<--- cut here ---
[ 169.302764] Unable to handle kernel paging request at virtual
address 2c86c000
[ 169.310089] [2c86c000] *pgd=00000000
[ 169.313720] Internal error: Oops: 5 [#1] SMP ARM
[ 169.318359] Modules linked in: act_csum act_pedit cls_flower
sch_prio ip_tables x_tables veth tun cfg80211 bluetooth
snd_soc_simple_card snd_soc_simple_card_utils etnaviv gpu_sched
onboard_usb_hub snd_soc_davinci_mcasp snd_soc_ti_udma snd_soc_ti_edma
snd_soc_ti_sdma snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm
snd_timer snd soundcore display_connector fuse [last unloaded:
test_blackhole_dev]
[ 169.353576] CPU: 0 PID: 295 Comm: rngd Not tainted 6.0.3-rc1 #1
[ 169.359527] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 169.365631] PC is at percpu_counter_add_batch+0x28/0xc4
[7] https://lore.kernel.org/all/CA+G9fYvepPVpDn5AP6bwDukpx7h++avMPEUARuHyvJqWwQ84uQ@xxxxxxxxxxxxxx/T/#u
## Build
* kernel: 6.0.3-rc1
* git: ['https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc',
'https://gitlab.com/mrchapp/linux']
* git branch: linux-6.0.y
* git commit: 84429734035197a6ab8e79c852d5e4e6ed744703
* git describe: v6.0-916-g844297340351
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.0.y/build/v6.0-916-g844297340351
## No Test Regressions (compared to v6.0.2)
## No Metric Regressions (compared to v6.0.2)
## No Test Fixes (compared to v6.0.2)
## No Metric Fixes (compared to v6.0.2)
## Test result summary
total: 131365, pass: 113062, fail: 4832, skip: 13064, xfail: 407
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 311 total, 307 passed, 4 failed
* arm64: 64 total, 64 passed, 0 failed
* i386: 55 total, 55 passed, 0 failed
* mips: 56 total, 55 passed, 1 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 69 total, 63 passed, 6 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 58 total, 58 passed, 0 failed
## Test suites summary
* /
* fwts
* igt-gpu-tools
* kself0009test-sync
* kself[
* kselft[
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-at
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ip
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org