[PATCH v4 05/11] firmware: arm_scmi: Refactor scmi_wait_for_message_response

From: Cristian Marussi
Date: Wed Oct 19 2022 - 16:47:16 EST


Refactor scmi_wait_for_message_response() to use a internal helper to
carry out its main duties; while doing that make it accept directly an
scmi_desc parameter to interact with the configured transport.

No functional change.

Signed-off-by: Cristian Marussi <cristian.marussi@xxxxxxx>
---
drivers/firmware/arm_scmi/driver.c | 57 +++++++++++++++++-------------
1 file changed, 33 insertions(+), 24 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 9c77c931d91b..d496dfe43618 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -791,36 +791,18 @@ static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
ktime_after(ktime_get(), stop);
}

-/**
- * scmi_wait_for_message_response - An helper to group all the possible ways of
- * waiting for a synchronous message response.
- *
- * @cinfo: SCMI channel info
- * @xfer: Reference to the transfer being waited for.
- *
- * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
- * configuration flags like xfer->hdr.poll_completion.
- *
- * Return: 0 on Success, error otherwise.
- */
-static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
- struct scmi_xfer *xfer)
+static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
+ struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer, unsigned int timeout_ms)
{
- struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
- struct device *dev = info->dev;
- int ret = 0, timeout_ms = info->desc->max_rx_timeout_ms;
-
- trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
- xfer->hdr.protocol_id, xfer->hdr.seq,
- timeout_ms,
- xfer->hdr.poll_completion);
+ int ret = 0;

if (xfer->hdr.poll_completion) {
/*
* Real polling is needed only if transport has NOT declared
* itself to support synchronous commands replies.
*/
- if (!info->desc->sync_cmds_completed_on_ret) {
+ if (!desc->sync_cmds_completed_on_ret) {
/*
* Poll on xfer using transport provided .poll_done();
* assumes no completion interrupt was available.
@@ -846,7 +828,7 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
*/
spin_lock_irqsave(&xfer->lock, flags);
if (xfer->state == SCMI_XFER_SENT_OK) {
- info->desc->ops->fetch_response(cinfo, xfer);
+ desc->ops->fetch_response(cinfo, xfer);
xfer->state = SCMI_XFER_RESP_OK;
}
spin_unlock_irqrestore(&xfer->lock, flags);
@@ -870,6 +852,33 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
return ret;
}

+/**
+ * scmi_wait_for_message_response - An helper to group all the possible ways of
+ * waiting for a synchronous message response.
+ *
+ * @cinfo: SCMI channel info
+ * @xfer: Reference to the transfer being waited for.
+ *
+ * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
+ * configuration flags like xfer->hdr.poll_completion.
+ *
+ * Return: 0 on Success, error otherwise.
+ */
+static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct device *dev = info->dev;
+
+ trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ info->desc->max_rx_timeout_ms,
+ xfer->hdr.poll_completion);
+
+ return scmi_wait_for_reply(dev, info->desc, cinfo, xfer,
+ info->desc->max_rx_timeout_ms);
+}
+
/**
* do_xfer() - Do one transfer
*
--
2.34.1