[PATCH 5/6] arm: dts: spear600: Add ssp controller nodes

From: Köry Maincent
Date: Wed Oct 19 2022 - 09:50:02 EST


From: Kory Maincent <kory.maincent@xxxxxxxxxxx>

The SPEAr600 has three Synchronous serial port to enables synchronous
serial communication with slave or master peripherals (SPI). Lets add these
nodes to be able to use them.

Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
---
arch/arm/boot/dts/spear600.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 9d5a04a46b14..6b67c0ceaed9 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -207,6 +207,36 @@ adc: adc@d820b000 {
interrupts = <6>;
status = "disabled";
};
+
+ ssp1: spi@d0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xd0100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&vic0>;
+ interrupts = <26>;
+ status = "disabled";
+ };
+
+ ssp2: spi@d0180000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xd0180000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&vic0>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ ssp3: spi@d8180000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xd8180000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <5>;
+ status = "disabled";
+ };
};
};
};
--
2.25.1