Re: [PATCH] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset

From: Ilpo Järvinen
Date: Wed Oct 19 2022 - 05:48:02 EST


On Wed, 19 Oct 2022, Sherry Sun wrote:

> lpuart_global_reset() shouldn't break the on-going transmit engin, need
> to recover the on-going data transfer after reset.
>
> This can help earlycon here, since commit 60f361722ad2 ("serial:
> fsl_lpuart: Reset prior to registration") moved lpuart_global_reset()
> before uart_add_one_port(), earlycon is writing during global reset,
> as global reset will disable the TX and clear the baud rate register,
> which caused the earlycon cannot work any more after reset, needs to
> restore the baud rate and re-enable the transmitter to recover the
> earlycon write.
>
> Fixes: bd5305dcabbc ("tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp")
> Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
> ---
> drivers/tty/serial/fsl_lpuart.c | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
> index 67fa113f77d4..5064fdba1b61 100644
> --- a/drivers/tty/serial/fsl_lpuart.c
> +++ b/drivers/tty/serial/fsl_lpuart.c
> @@ -408,11 +408,9 @@ static int lpuart_global_reset(struct lpuart_port *sport)
> {
> struct uart_port *port = &sport->port;
> void __iomem *global_addr;
> + unsigned long tx_enable, bd, stat, sfifo;
> int ret;
>
> - if (uart_console(port))
> - return 0;
> -
> ret = clk_prepare_enable(sport->ipg_clk);
> if (ret) {
> dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
> @@ -420,11 +418,30 @@ static int lpuart_global_reset(struct lpuart_port *sport)
> }
>
> if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
> + /*
> + * If the transmitter is used by earlycon, wait transmit engin complete
> + * and then reset
> + */
> + tx_enable = lpuart32_read(port, UARTCTRL) & UARTCTRL_TE;
> + if (tx_enable) {
> + bd = lpuart32_read(&sport->port, UARTBAUD);
> + stat = lpuart32_read(port, UARTSTAT);
> + sfifo = lpuart32_read(port, UARTFIFO);
> + while (!(stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT))
> + cpu_relax();

This loop, if ever taken once, will loop forever as neither stat nor sfifo
are reread inside the loop.

--
i.

> + }
> +
> global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
> writel(UART_GLOBAL_RST, global_addr);
> usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
> writel(0, global_addr);
> usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
> +
> + /* Recover the transmitter for earlycon */
> + if (tx_enable) {
> + lpuart32_write(port, bd, UARTBAUD);
> + lpuart32_write(port, UARTCTRL_TE, UARTCTRL);
> + }
> }
>
> clk_disable_unprepare(sport->ipg_clk);
>