Re: [PATCH v1 2/3] arm64: dts: mt8195: Add pcie and pcie phy nodes

From: AngeloGioacchino Del Regno
Date: Wed Oct 19 2022 - 05:36:17 EST


Il 17/10/22 09:08, Tinghan Shen ha scritto:
Add pcie and pcie phy nodes for mt8195.

Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
Signed-off-by: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 143 +++++++++++++++++++++++
1 file changed, 143 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index d03f0c2b8233..903e92d6156f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1182,6 +1182,104 @@
status = "disabled";
};
+ pcie0: pcie@112f0000 {
+ compatible = "mediatek,mt8195-pcie",
+ "mediatek,mt8192-pcie";

..snip..

+
+ phys = <&pciephy>;
+ phy-names = "pcie-phy";
+
+ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;

You're missing the resets:

resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
reset-names = "mac";

+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;

..snip..

+ };
+
+ pcie1: pcie@112f8000 {
+ compatible = "mediatek,mt8195-pcie",
+ "mediatek,mt8192-pcie";

..snip..

+ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;

Here too:
resets = <&infracfg_ao MT8195_INFRA_RST2_USBSIF_P1_SWRST>,
<&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
reset-names = "phy", "mac";

+
+ #interrupt-cells = <1>;

..snip..

@@ -1241,6 +1339,34 @@
reg = <0x189 0x2>;
bits = <7 5>;
};
+ pciephy_rx_ln1: pciephy-rx-ln1@190 {
+ reg = <0x190 0x1>;
+ bits = <0 4>;
+ };
+ pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190 {

Please run dtbs_check and try to build the kernel before pushing commits upstream.
This will give you a not-so-nice warning and that shall not happen.

You can solve it by naming these nodes like:
pciephy-rx-ln1@190,1
pciephy-tx-ln1-nmos@190,2

...etc

Regards,
Angelo