[PATCH 6.0 777/862] ARM: dts: imx6sl: use tabs for code indent

From: Greg Kroah-Hartman
Date: Wed Oct 19 2022 - 05:35:44 EST


From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>

[ Upstream commit 218db824a7519856d0eaaeb5c41ca504ed550210 ]

This fixes the following error:

arch/arm/boot/dts/imx6sl.dtsi:714: error: code indent should use tabs
where possible

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index cfd6b4972ae7..01122ddfdc0d 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -61,10 +61,10 @@
<792000 1175000>,
<396000 975000>;
fsl,soc-operating-points =
- /* ARM kHz SOC-PU uV */
- <996000 1225000>,
- <792000 1175000>,
- <396000 1175000>;
+ /* ARM kHz SOC-PU uV */
+ <996000 1225000>,
+ <792000 1175000>,
+ <396000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
@@ -225,7 +225,7 @@

uart5: serial@2018000 {
compatible = "fsl,imx6sl-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
@@ -238,7 +238,7 @@

uart1: serial@2020000 {
compatible = "fsl,imx6sl-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
@@ -251,7 +251,7 @@

uart2: serial@2024000 {
compatible = "fsl,imx6sl-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
@@ -312,7 +312,7 @@

uart3: serial@2034000 {
compatible = "fsl,imx6sl-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
@@ -325,7 +325,7 @@

uart4: serial@2038000 {
compatible = "fsl,imx6sl-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
@@ -714,7 +714,7 @@
#power-domain-cells = <0>;
power-supply = <&reg_pu>;
clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
- <&clks IMX6SL_CLK_GPU2D_PODF>;
+ <&clks IMX6SL_CLK_GPU2D_PODF>;
};

pd_disp: power-domain@2 {
--
2.35.1