Re: [RFC PATCH v1 2/2] ARM: dts: rk3288: add the interrupts property for PWM

From: Uwe Kleine-König
Date: Wed Oct 19 2022 - 03:26:55 EST


On Thu, Sep 29, 2022 at 04:50:43PM +0100, Robin Murphy wrote:
> On 2022-09-29 15:04, Johan Jonker wrote:
> > The Rockchip rk3288 SoC has 4-built-in PWM channels.
> >
> > Configurable to operate in capture mode.
> > Measures the high/low polarity effective cycles of this input waveform
> > Generates a single interrupt at the transition of input waveform polarity
> >
> > Configurable to operate in continuous mode or one-shot mode.
> > One-shot operation will produce N + 1 periods of the waveform,
> > where N is the repeat counter value, and generates a single interrupt at
> > the end of operation.
> > Continuous mode generates the waveform continuously and
> > do not generates any interrupts.
> >
> > Add interrupts property to rk3288 PWM nodes.
>
> As far as I can make out from the TRM, these are only valid when
> GRF_SOC_CON2[0] = 0, otherwise it's in "new" RK_PWM mode using SPI 78 for
> all channels. Which apparently will be the case for anyone using upstream
> U-Boot:
>
> https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/mach-rockchip/rk3288/rk3288.c#L83

Huh, so it depends on a (software) setting which irqs are in use? So the
patch isn't correct as is, but I have no idea how to make it right.
Should we rely on the bootloader to fixup the dtb correctly?

Anyhow, I'm marking the patch as 'changes-requested' in our patchwork
instance.

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |

Attachment: signature.asc
Description: PGP signature