Re: [PATCH v4 2/3] riscv: dts: starfive: Add common DT for JH7100 based boards

From: Matthias Brugger
Date: Tue Oct 18 2022 - 04:22:32 EST


On Tue, Oct 18, 2022 at 12:05:41AM +0300, Cristian Ciocaltea wrote:
> In preparation for adding initial device tree support for the StarFive
> VisionFive board, which is similar with BeagleV Starlight, move most
> of the content from jh7100-beaglev-starlight.dts to a new file, to be
> shared between the two boards.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Reviewed-by: Matthias Brugger <mbrugger@xxxxxxxx>

> ---
> .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
> ...aglev-starlight.dts => jh7100-common.dtsi} | 3 -
> 2 files changed, 1 insertion(+), 155 deletions(-)
> copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
> index f7a230110512..7cda3a89020a 100644
> --- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
> +++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
> @@ -5,160 +5,9 @@
> */
>
> /dts-v1/;
> -#include "jh7100.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
> +#include "jh7100-common.dtsi"
>
> / {
> model = "BeagleV Starlight Beta";
> compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
> -
> - aliases {
> - serial0 = &uart3;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - cpus {
> - timebase-frequency = <6250000>;
> - };
> -
> - memory@80000000 {
> - device_type = "memory";
> - reg = <0x0 0x80000000 0x2 0x0>;
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> -
> - led-ack {
> - gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_HEARTBEAT;
> - linux,default-trigger = "heartbeat";
> - label = "ack";
> - };
> - };
> -};
> -
> -&gpio {
> - i2c0_pins: i2c0-0 {
> - i2c-pins {
> - pinmux = <GPIOMUX(62, GPO_LOW,
> - GPO_I2C0_PAD_SCK_OEN,
> - GPI_I2C0_PAD_SCK_IN)>,
> - <GPIOMUX(61, GPO_LOW,
> - GPO_I2C0_PAD_SDA_OEN,
> - GPI_I2C0_PAD_SDA_IN)>;
> - bias-disable; /* external pull-up */
> - input-enable;
> - input-schmitt-enable;
> - };
> - };
> -
> - i2c1_pins: i2c1-0 {
> - i2c-pins {
> - pinmux = <GPIOMUX(47, GPO_LOW,
> - GPO_I2C1_PAD_SCK_OEN,
> - GPI_I2C1_PAD_SCK_IN)>,
> - <GPIOMUX(48, GPO_LOW,
> - GPO_I2C1_PAD_SDA_OEN,
> - GPI_I2C1_PAD_SDA_IN)>;
> - bias-pull-up;
> - input-enable;
> - input-schmitt-enable;
> - };
> - };
> -
> - i2c2_pins: i2c2-0 {
> - i2c-pins {
> - pinmux = <GPIOMUX(60, GPO_LOW,
> - GPO_I2C2_PAD_SCK_OEN,
> - GPI_I2C2_PAD_SCK_IN)>,
> - <GPIOMUX(59, GPO_LOW,
> - GPO_I2C2_PAD_SDA_OEN,
> - GPI_I2C2_PAD_SDA_IN)>;
> - bias-disable; /* external pull-up */
> - input-enable;
> - input-schmitt-enable;
> - };
> - };
> -
> - uart3_pins: uart3-0 {
> - rx-pins {
> - pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
> - GPI_UART3_PAD_SIN)>;
> - bias-pull-up;
> - drive-strength = <14>;
> - input-enable;
> - input-schmitt-enable;
> - slew-rate = <0>;
> - };
> - tx-pins {
> - pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
> - GPO_ENABLE, GPI_NONE)>;
> - bias-disable;
> - drive-strength = <35>;
> - input-disable;
> - input-schmitt-disable;
> - slew-rate = <0>;
> - };
> - };
> -};
> -
> -&i2c0 {
> - clock-frequency = <100000>;
> - i2c-sda-hold-time-ns = <300>;
> - i2c-sda-falling-time-ns = <500>;
> - i2c-scl-falling-time-ns = <500>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c0_pins>;
> - status = "okay";
> -
> - pmic@5e {
> - compatible = "ti,tps65086";
> - reg = <0x5e>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - regulators {
> - };
> - };
> -};
> -
> -&i2c1 {
> - clock-frequency = <400000>;
> - i2c-sda-hold-time-ns = <300>;
> - i2c-sda-falling-time-ns = <100>;
> - i2c-scl-falling-time-ns = <100>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c1_pins>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - clock-frequency = <100000>;
> - i2c-sda-hold-time-ns = <300>;
> - i2c-sda-falling-time-ns = <500>;
> - i2c-scl-falling-time-ns = <500>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c2_pins>;
> - status = "okay";
> -};
> -
> -&osc_sys {
> - clock-frequency = <25000000>;
> -};
> -
> -&osc_aud {
> - clock-frequency = <27000000>;
> -};
> -
> -&uart3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart3_pins>;
> - status = "okay";
> };
> diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
> similarity index 96%
> copy from arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
> copy to arch/riscv/boot/dts/starfive/jh7100-common.dtsi
> index f7a230110512..b93ce351a90f 100644
> --- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
> +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
> @@ -11,9 +11,6 @@
> #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
>
> / {
> - model = "BeagleV Starlight Beta";
> - compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
> -
> aliases {
> serial0 = &uart3;
> };
> --
> 2.38.0
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv