[PATCH 03/10] net: Replace spi->chip_select references to spi->chip_select[0]

From: Amit Kumar Mahapatra
Date: Mon Oct 17 2022 - 08:15:18 EST


For adding multi CS support & to prevent any existing driver from
breaking, replaced all spi->chip_select references to spi->chip_select[0].

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
---
drivers/net/ethernet/asix/ax88796c_main.c | 2 +-
drivers/net/ethernet/davicom/dm9051.c | 2 +-
drivers/net/ieee802154/ca8210.c | 2 +-
drivers/net/wan/slic_ds26522.c | 2 +-
drivers/net/wireless/marvell/libertas/if_spi.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/asix/ax88796c_main.c b/drivers/net/ethernet/asix/ax88796c_main.c
index 6ba5b024a7be..65586ff24dfb 100644
--- a/drivers/net/ethernet/asix/ax88796c_main.c
+++ b/drivers/net/ethernet/asix/ax88796c_main.c
@@ -1006,7 +1006,7 @@ static int ax88796c_probe(struct spi_device *spi)
ax_local->mdiobus->parent = &spi->dev;

snprintf(ax_local->mdiobus->id, MII_BUS_ID_SIZE,
- "ax88796c-%s.%u", dev_name(&spi->dev), spi->chip_select);
+ "ax88796c-%s.%u", dev_name(&spi->dev), spi->chip_select[0]);

ret = devm_mdiobus_register(&spi->dev, ax_local->mdiobus);
if (ret < 0) {
diff --git a/drivers/net/ethernet/davicom/dm9051.c b/drivers/net/ethernet/davicom/dm9051.c
index a523ddda7609..835674ad6ceb 100644
--- a/drivers/net/ethernet/davicom/dm9051.c
+++ b/drivers/net/ethernet/davicom/dm9051.c
@@ -1121,7 +1121,7 @@ static int dm9051_mdio_register(struct board_info *db)
db->mdiobus->phy_mask = (u32)~BIT(1);
db->mdiobus->parent = &spi->dev;
snprintf(db->mdiobus->id, MII_BUS_ID_SIZE,
- "dm9051-%s.%u", dev_name(&spi->dev), spi->chip_select);
+ "dm9051-%s.%u", dev_name(&spi->dev), spi->chip_select[0]);

ret = devm_mdiobus_register(&spi->dev, db->mdiobus);
if (ret)
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index 42c0b451088d..f0ccf1cd79f4 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -2967,7 +2967,7 @@ static int ca8210_test_interface_init(struct ca8210_priv *priv)
sizeof(node_name),
"ca8210@%d_%d",
priv->spi->master->bus_num,
- priv->spi->chip_select
+ priv->spi->chip_select[0]
);

test->ca8210_dfs_spi_int = debugfs_create_file(
diff --git a/drivers/net/wan/slic_ds26522.c b/drivers/net/wan/slic_ds26522.c
index 6063552cea9b..eb053a76fe52 100644
--- a/drivers/net/wan/slic_ds26522.c
+++ b/drivers/net/wan/slic_ds26522.c
@@ -211,7 +211,7 @@ static int slic_ds26522_probe(struct spi_device *spi)

ret = slic_ds26522_init_configure(spi);
if (ret == 0)
- pr_info("DS26522 cs%d configured\n", spi->chip_select);
+ pr_info("DS26522 cs%d configured\n", spi->chip_select[0]);

return ret;
}
diff --git a/drivers/net/wireless/marvell/libertas/if_spi.c b/drivers/net/wireless/marvell/libertas/if_spi.c
index ff1c7ec8c450..074d6c1f0c2c 100644
--- a/drivers/net/wireless/marvell/libertas/if_spi.c
+++ b/drivers/net/wireless/marvell/libertas/if_spi.c
@@ -1051,7 +1051,7 @@ static int if_spi_init_card(struct if_spi_card *card)
"spi->max_speed_hz=%d\n",
card->card_id, card->card_rev,
card->spi->master->bus_num,
- card->spi->chip_select,
+ card->spi->chip_select[0],
card->spi->max_speed_hz);
err = if_spi_prog_helper_firmware(card, helper);
if (err)
--
2.17.1