Re: [PATCH v3 00/13] Add support for the Hardkernel ODROID-M1 board

[Dan Johansen]

Trying to apply the patchset, but patch 3 does not seem to apply on top 
of patch 2 for me.

We do patch in other rk3568 boards, which is messing up the Makefile 
patching, so I needed to redo patch 2 to fit.

So it might an error on my part.

Den 15.10.2022 kl. 20.47 skrev Aurelien Jarno:
> On 2022-10-08 15:53, Aurelien Jarno wrote:
> > On 2022-10-08 14:11, Dan Johansen wrote:
> > > Den 30.09.2022 kl. 07.12 skrev Aurelien Jarno:
> > > > On the ODROID forum, Dongjin Kim said he is not planning to submit a new
> > > > version of the patchset adding support for the Hardkernel ODROID-M1
> > > > board. I therefore decided to address the issues reported during the
> > > > initial review, and I also did some small fixes either because some
> > > > things changed in the meantime on the kernel side or because I noticed
> > > > some warning or issues when using the hardware.
> > > >
> > > > I continued writing some additional patches to complete the ODROID M1
> > > > DTS to almost fully support the hardware, the drivers being already
> > > > present in the kernel.
> > > >
> > > > This new version includes feedback from the linux-rockchip mailing list
> > > > and from the Odroid forum.
> > > >
> > > > Changes since v2:
> > > > * Renamed "Rockchip RK3568 Hardkernel ODROID-M1" into "Hardkernel Odroid
> > > >     M1" and fix the sorting.
> > > > * Fix sorting of arch/arm64/boot/dts/rockchip/Makefile
> > > > * Collected Acked-by and Tested-by
> > > Even though I added my Tested-by to this series, it seems I didn't test it
> > > on eMMC.
> > >
> > > This fails to boot for me on eMMC, but works on SD card and NVMe.
> > Thanks for the feedback. I do not have an eMMC, so this the only part
> > from the patchset that I haven't been able to test.
> >
> > First of all, which version have you tested? The v2 includes fixes for
> > the eMMC, there was a conflict with the NOR flash. If the problem is
> > still there in the v2, could you please send the boot log or the error
> > message?
> Sorry I meant v3 above. Anyway in the meantime I have bought an eMMC,
> and I confirm that:
> - it does no work with the v2 due to a conflict with the NOR flash
>    driver
> - it does work with the v3
>
> Therefore can you please retry with the v3?
>
> Thanks
> Aurelien
--
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>