[RFC] ACPI: PCC: Support shared interrupt for multiple subspaces

From: Huisong Li
Date: Sat Oct 15 2022 - 23:41:03 EST


As ACPI protocol descripted, if interrupts are level, a GSIV may
be shared by multiple subspaces, but each one must have unique
platform interrupt ack preserve and ack set masks. Therefore, need
set to shared interrupt for types that can distinguish interrupt
response channel if platform interrupt mode is level triggered.

The distinguishing point isn't definitely command complete register.
Because the two status values of command complete indicate that
there is no interrupt in a subspace('1' means subspace is free for
use, and '0' means platform is processing the command). On the whole,
the platform interrupt ack register is more suitable for this role.
As ACPI protocol said, If the subspace does support interrupts, and
these are level, this register must be supplied. And is used to clear
the interrupt by using a read, modify, write sequence. This register
is a 'WR' register, the bit corresponding to the subspace is '1' when
the command is completed, or is '0'.

Therefore, register shared interrupt for multiple subspaces if support
platform interrupt ack register and interrupts are level, and read the
ack register to ensure the idle or unfinished command channels to
quickly return IRQ_NONE.

Signed-off-by: Huisong Li <lihuisong@xxxxxxxxxx>
---
drivers/mailbox/pcc.c | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 3c2bc0ca454c..86c6cc44c73d 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -100,6 +100,7 @@ struct pcc_chan_info {
struct pcc_chan_reg cmd_update;
struct pcc_chan_reg error;
int plat_irq;
+ u8 plat_irq_trigger;
};

#define to_pcc_chan_info(c) container_of(c, struct pcc_chan_info, chan)
@@ -236,6 +237,15 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
int ret;

pchan = chan->con_priv;
+ ret = pcc_chan_reg_read(&pchan->plat_irq_ack, &val);
+ if (ret)
+ return IRQ_NONE;
+ /* Irq ack GAS exist and check if this interrupt has the channel. */
+ if (pchan->plat_irq_ack.gas) {
+ val &= pchan->plat_irq_ack.set_mask;
+ if (val == 0)
+ return IRQ_NONE;
+ }

ret = pcc_chan_reg_read(&pchan->cmd_complete, &val);
if (ret)
@@ -309,10 +319,21 @@ pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id)
spin_unlock_irqrestore(&chan->lock, flags);

if (pchan->plat_irq > 0) {
+ unsigned long irqflags;
int rc;

- rc = devm_request_irq(dev, pchan->plat_irq, pcc_mbox_irq, 0,
- MBOX_IRQ_NAME, chan);
+ /*
+ * As ACPI protocol descripted, if interrupts are level, a GSIV
+ * may be shared by multiple subspaces.
+ * Therefore, register shared interrupt for multiple subspaces
+ * if support platform interrupt ack register and interrupts
+ * are level.
+ */
+ irqflags = (pchan->plat_irq_ack.gas &&
+ pchan->plat_irq_trigger == ACPI_LEVEL_SENSITIVE) ?
+ IRQF_SHARED : 0;
+ rc = devm_request_irq(dev, pchan->plat_irq, pcc_mbox_irq,
+ irqflags, MBOX_IRQ_NAME, chan);
if (unlikely(rc)) {
dev_err(dev, "failed to register PCC interrupt %d\n",
pchan->plat_irq);
@@ -457,6 +478,8 @@ static int pcc_parse_subspace_irq(struct pcc_chan_info *pchan,
pcct_ss->platform_interrupt);
return -EINVAL;
}
+ pchan->plat_irq_trigger = (pcct_ss->flags & ACPI_PCCT_INTERRUPT_MODE) ?
+ ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;

if (pcct_ss->header.type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
struct acpi_pcct_hw_reduced_type2 *pcct2_ss = (void *)pcct_ss;
--
2.33.0