Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

From: Krzysztof Kozlowski
Date: Sat Oct 15 2022 - 09:28:54 EST


On 14/10/2022 18:11, Melody Olvera wrote:
> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
>
> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/qru1000.dtsi | 27 +
> 2 files changed, 1673 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen: chosen { };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + clock-frequency = <19200000>;

Both clocks are not a property of a SoC. They are provided by the board,
so they should either be defined by board DTS or at least their
frequency must be provided by the board.

> + clock-output-names = "xo_board";
> + #clock-cells = <0>;
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + power-domain-names = "psci";
> + power-domains = <&CPU_PD0>;
> + qcom,freq-domains = <&cpufreq_hw 0>;
> + next-level-cache = <&L2_0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;

Wrong indentation.

> + L3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + power-domains = <&CPU_PD1>;
> + power-domain-names = "psci";
> + qcom,freq-domains = <&cpufreq_hw 0>;
> + next-level-cache = <&L2_100>;
> + L2_100: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> +

Drop empty lines like that.

> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + power-domains = <&CPU_PD2>;
> + power-domain-names = "psci";
> + qcom,freq-domains = <&cpufreq_hw 0>;
> + next-level-cache = <&L2_200>;
> + L2_200: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + power-domains = <&CPU_PD3>;
> + power-domain-names = "psci";
> + qcom,freq-domains = <&cpufreq_hw 0>;
> + next-level-cache = <&L2_300>;
> + L2_300: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> +

Here...

> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + };
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + CPU_OFF: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "rail-pc";
> + entry-latency-us = <274>;
> + exit-latency-us = <480>;
> + min-residency-us = <3934>;
> + arm,psci-suspend-param = <0x40000004>;
> + local-timer-stop;
> + };
> + };
> +
> + domain-idle-states {
> + CLUSTER_SLEEP_0: cluster-sleep-0 {
> + compatible = "domain-idle-state";
> + idle-state-name = "cluster-l3-off";
> + entry-latency-us = <584>;
> + exit-latency-us = <2332>;
> + min-residency-us = <6118>;
> + arm,psci-suspend-param = <0x41000044>;
> + };
> +
> + CLUSTER_SLEEP_1: cluster-sleep-1 {
> + compatible = "domain-idle-state";
> + idle-state-name = "cluster-power-collapse";
> + entry-latency-us = <2893>;
> + exit-latency-us = <4023>;
> + min-residency-us = <9987>;
> + arm,psci-suspend-param = <0x41003344>;
> + };
> + };
> +
> + firmware {
> + qcom_scm {

No underscores in node names. This applies everywhere.

Node names should be generic, so just scm.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> + compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> + #reset-cells = <1>;
> + };
> + };
> +
> + clk_virt: interconnect-0 {
> + compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect-1 {
> + compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x80000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> +
> + CPU_PD0: cpu-pd0 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_OFF>;
> + };
> +
> + CPU_PD1: cpu-pd1 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_OFF>;
> + };
> +
> + CPU_PD2: cpu-pd2 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_OFF>;
> + };
> +
> + CPU_PD3: cpu-pd3 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_OFF>;
> + };
> +
> + CLUSTER_PD: cluster-pd {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
> + };
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hyp_mem: memory@80000000 {
> + no-map;
> + reg = <0x0 0x80000000 0x0 0x600000>;
> + };
> +
> + xbl_dt_log_mem: memory@80600000 {
> + no-map;
> + reg = <0x0 0x80600000 0x0 0x40000>;
> + };
> +
> + xbl_ramdump_mem: memory@80640000 {
> + no-map;
> + reg = <0x0 0x80640000 0x0 0x1c0000>;
> + };
> +
> + aop_image_mem: memory@80800000 {
> + no-map;
> + reg = <0x0 0x80800000 0x0 0x60000>;
> + };
> +
> + aop_cmd_db_mem: memory@80860000 {
> + compatible = "qcom,cmd-db";
> + no-map;
> + reg = <0x0 0x80860000 0x0 0x20000>;
> + };
> +
> + aop_config_mem: memory@80880000 {
> + no-map;
> + reg = <0x0 0x80880000 0x0 0x20000>;
> + };
> +
> + tme_crash_dump_mem: memory@808a0000 {
> + no-map;
> + reg = <0x0 0x808a0000 0x0 0x40000>;
> + };
> +
> + tme_log_mem: memory@808e0000 {
> + no-map;
> + reg = <0x0 0x808e0000 0x0 0x4000>;
> + };
> +
> + uefi_log_mem: memory@808e4000 {
> + no-map;
> + reg = <0x0 0x808e4000 0x0 0x10000>;
> + };
> +
> + /* secdata region can be reused by apps */
> +
> + smem_mem: memory@80900000 {
> + compatible = "qcom,smem";
> + no-map;
> + reg = <0x0 0x80900000 0x0 0x200000>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + cpucp_fw_mem: memory@80b00000 {
> + no-map;
> + reg = <0x0 0x80b00000 0x0 0x100000>;
> + };
> +
> + xbl_sc_mem: memory@80c00000 {
> + no-map;
> + reg = <0x0 0x80c00000 0x0 0x40000>;
> + };
> +
> + /* uefi region can be reused by apps */
> +
> + tz_stat_mem: memory@81d00000 {
> + no-map;
> + reg = <0x0 0x81d00000 0x0 0x100000>;
> + };
> +
> + tags_mem: memory@81e00000 {
> + no-map;
> + reg = <0x0 0x81e00000 0x0 0x500000>;
> + };
> +
> + qtee_mem: memory@82300000 {
> + no-map;
> + reg = <0x0 0x82300000 0x0 0x500000>;
> + };
> +
> + ta_mem: memory@82800000 {
> + no-map;
> + reg = <0x0 0x82800000 0x0 0xa00000>;
> + };
> +
> + fs1_mem: memory@83200000 {
> + no-map;
> + reg = <0x0 0x83200000 0x0 0x400000>;
> + };
> +
> + fs2_mem: memory@83600000 {
> + no-map;
> + reg = <0x0 0x83600000 0x0 0x400000>;
> + };
> +
> + fs3_mem: memory@83a00000 {
> + no-map;
> + reg = <0x0 0x83a00000 0x0 0x400000>;
> + };
> +
> + /* Linux kernel image is loaded at 0x83e00000 */
> +
> + ipa_fw_mem: memory@8be00000 {
> + no-map;
> + reg = <0x0 0x8be00000 0x0 0x10000>;
> + };
> +
> + ipa_gsi_mem: memory@8be10000 {
> + no-map;
> + reg = <0x0 0x8be10000 0x0 0x14000>;
> + };
> +
> + mpss_mem: memory@8c000000 {
> + no-map;
> + reg = <0x0 0x8c000000 0x0 0x12c00000>;
> + };
> +
> + q6_mpss_dtb_mem: memory@9ec00000 {
> + no-map;
> + reg = <0x0 0x9ec00000 0x0 0x80000>;
> + };
> +
> + tenx_mem: memory@a0000000 {
> + no-map;
> + reg = <0x0 0xa0000000 0x0 0x19600000>;
> + };
> +
> + oem_tenx_mem: memory@b9600000 {
> + no-map;
> + reg = <0x0 0xb9600000 0x0 0x6a00000>;
> + };
> +
> + tenx_q6_buffer_mem: memory@c0000000 {
> + no-map;
> + reg = <0x0 0xc0000000 0x0 0x3200000>;
> + };
> +
> + ipa_buffer_mem: memory@c3200000 {
> + no-map;
> + reg = <0x0 0xc3200000 0x0 0x12c00000>;
> + };
> + };
> +
> + soc: soc@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0 0 0 0 0x10 0>;
> + dma-ranges = <0 0 0 0 0x10 0>;
> + compatible = "simple-bus";
> +
> + gcc: clock-controller@80000 {
> + compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
> + reg = <0x0 0x80000 0x0 0x1f4200>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> + clock-names = "bi_tcxo", "sleep_clk";
> + };
> +
> + gpi_dma0: dma-controller@900000 {
> + compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> + #dma-cells = <5>;
> + reg = <0x0 0x900000 0x0 0x60000>;
> + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> + dma-channels = <12>;
> + dma-channel-mask = <0x3f>;
> + iommus = <&apps_smmu 0xf6 0x0>;
> + status = "ok";

Drop it everywhere. It's by default.

> + };
> +
> + qupv3_id_0: geniqup@9c0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0x9c0000 0x0 0x2000>;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + iommus = <&apps_smmu 0xe3 0x0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0
> + &clk_virt SLAVE_QUP_CORE_0 0>;
> + interconnect-names = "qup-core";
> + qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
> + qcom,iommu-geometry = <0x40000000 0x10000000>;
> + qcom,iommu-dma = "fastmap";
> + dma-coherent;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + uart0: serial@980000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0x980000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart0_default>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@984000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x984000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c1_data_clk>;
> + dmas = <&gpi_dma0 0 1 3 64 0>,
> + <&gpi_dma0 1 1 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi1: spi@984000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x984000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> + dmas = <&gpi_dma0 0 1 1 64 0>,
> + <&gpi_dma0 1 1 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c2: i2c@988000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x988000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c2_data_clk>;
> + dmas = <&gpi_dma0 0 2 3 64 0>,
> + <&gpi_dma0 1 2 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi2: spi@988000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x988000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> + dmas = <&gpi_dma0 0 2 1 64 0>,
> + <&gpi_dma0 1 2 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c3: i2c@98c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x98c000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c3_data_clk>;
> + dmas = <&gpi_dma0 0 3 3 64 0>,
> + <&gpi_dma0 1 3 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi3: spi@98c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x98c000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> + dmas = <&gpi_dma0 0 3 1 64 0>,
> + <&gpi_dma0 1 3 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c4: i2c@990000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x990000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c4_data_clk>;
> + dmas = <&gpi_dma0 0 4 3 64 0>,
> + <&gpi_dma0 1 4 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi4: spi@990000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x990000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> + dmas = <&gpi_dma0 0 4 1 64 0>,
> + <&gpi_dma0 1 4 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c5: i2c@994000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x994000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c5_data_clk>;
> + dmas = <&gpi_dma0 0 5 3 64 0>,
> + <&gpi_dma0 1 5 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi5: spi@994000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x994000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> + dmas = <&gpi_dma0 0 5 1 64 0>,
> + <&gpi_dma0 1 5 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c6: i2c@998000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x998000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c6_data_clk>;
> + dmas = <&gpi_dma0 0 6 3 64 0>,
> + <&gpi_dma0 1 6 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi6: spi@998000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x998000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> + <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> + dmas = <&gpi_dma0 0 6 1 64 0>,
> + <&gpi_dma0 1 6 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + uart7: serial@99c000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0x0 0x99c000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> + gpi_dma1: dma-controller@a00000 {
> + compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> + #dma-cells = <5>;
> + reg = <0x0 0xa00000 0x0 0x60000>;
> + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> + dma-channels = <12>;
> + dma-channel-mask = <0x3f>;
> + iommus = <&apps_smmu 0x116 0x0>;
> + status = "ok";

And here

> + };
> +
> + qupv3_id_1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0xac0000 0x0 0x2000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x103 0x0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clock-names = "m-ahb", "s-ahb";

clock-names *always* follow clocks

> +
> + ranges;
> + status = "disabled";
> +
> + uart8: serial@a80000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0xa80000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart8_default>;
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@a84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0xa84000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c9_data_clk>;
> + dmas = <&gpi_dma1 0 1 3 64 0>,
> + <&gpi_dma1 1 1 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi9: spi@a84000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa84000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> + dmas = <&gpi_dma1 0 1 1 64 0>,
> + <&gpi_dma1 1 1 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c10: i2c@a88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0xa88000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c10_data_clk>;
> + dmas = <&gpi_dma1 0 2 3 64 0>,
> + <&gpi_dma1 1 2 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi10: spi@a88000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa88000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> + dmas = <&gpi_dma1 0 2 1 64 0>,
> + <&gpi_dma1 1 2 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c11: i2c@a8c000 {
> + compatible = "qcom,i2c-geni";
> + reg = <0x0 0xa8c000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c11_data_clk>;
> + dmas = <&gpi_dma1 0 3 3 64 0>,
> + <&gpi_dma1 1 3 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi11: spi@a8c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa8c000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> + dmas = <&gpi_dma1 0 3 1 64 0>,
> + <&gpi_dma1 1 3 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c12: i2c@a90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0xa90000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c12_data_clk>;
> + dmas = <&gpi_dma1 0 4 3 64 0>,
> + <&gpi_dma1 1 4 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi12: spi@a90000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa90000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> + dmas = <&gpi_dma1 0 4 1 64 0>,
> + <&gpi_dma1 1 4 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c13: i2c@a94000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0xa94000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c13_data_clk>;
> + dmas = <&gpi_dma1 0 5 3 64 0>,
> + <&gpi_dma1 1 5 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart13: serial@a94000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0xa94000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart13_default>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi13: spi@a94000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa94000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> + dmas = <&gpi_dma1 0 5 1 64 0>,
> + <&gpi_dma1 1 5 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c14: i2c@a98000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0xa98000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c14_data_clk>;
> + dmas = <&gpi_dma1 0 6 3 64 0>,
> + <&gpi_dma1 1 6 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi14: spi@a98000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa98000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
> + dmas = <&gpi_dma1 0 6 1 64 0>,
> + <&gpi_dma1 1 6 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + i2c15: i2c@a9c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0xa9c000 0x0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c15_data_clk>;
> + dmas = <&gpi_dma1 0 7 3 64 0>,
> + <&gpi_dma1 1 7 3 64 0>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi15: spi@a9c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0xa9c000 0x0 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects =
> + <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> + <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
> + dmas = <&gpi_dma1 0 7 1 64 0>,
> + <&gpi_dma1 1 7 1 64 0>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> + };
> +
> + system_noc: interconnect@1640000 {
> + reg = <0x0 0x1640000 0x0 0x45080>;
> + compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x1f40000 0x0 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + pdc: interrupt-controller@b220000 {
> + compatible = "qcom,pdc";
> + reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> + reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
> + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
> + <94 609 31>, <125 63 1>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + };
> +
> + spmi_bus: spmi@c400000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0x0 0xc400000 0x0 0x3000>,
> + <0x0 0xc500000 0x0 0x400000>,
> + <0x0 0xc440000 0x0 0x80000>,
> + <0x0 0xc4c0000 0x0 0x10000>,
> + <0x0 0xc42d000 0x0 0x4000>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + };
> +
> + tlmm: pinctrl@f000000 {
> + compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
> + reg = <0x0 0xf000000 0x0 0x1000000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 151>;
> + wakeup-parent = <&pdc>;
> +
> + qup_uart0_default: qup-uart0-default-state {
> + pins = "gpio6", "gpio7", "gpio8", "gpio9";
> + function = "qup00";
> + };
> +
> + qup_i2c1_data_clk: qup-i2c1-data-clk {

-state suffix

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> + pins = "gpio10", "gpio11";
> + function = "qup01";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi1_data_clk: qup-spi1-data-clk {> + pins = "gpio10", "gpio11", "gpio12";
> + function = "qup01";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi1_cs: qup-spi1-cs {
> + pins = "gpio13";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c2_data_clk: qup-i2c2-data-clk {
> + pins = "gpio12", "gpio13";
> + function = "qup02";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi2_data_clk: qup-spi2-data-clk {
> + pins = "gpio12", "gpio13", "gpio10";
> + function = "qup02";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi2_cs: qup-spi2-cs {
> + pins = "gpio11";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c3_data_clk: qup-i2c3-data-clk {
> + pins = "gpio14", "gpio15";
> + function = "qup03";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi3_data_clk: qup-spi3-data-clk {
> + pins = "gpio14", "gpio15", "gpio16";
> + function = "qup03";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi3_cs: qup-spi3-cs {
> + pins = "gpio17";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c4_data_clk: qup-i2c4-data-clk {
> + pins = "gpio16", "gpio17";
> + function = "qup04";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi4_data_clk: qup-spi4-data-clk {
> + pins = "gpio16", "gpio17", "gpio14";
> + function = "qup04";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi4_cs: qup-spi4-cs {
> + pins = "gpio15";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c5_data_clk: qup-i2c5-data-clk {
> + pins = "gpio130", "gpio131";
> + function = "qup05";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi5_data_clk: qup-spi5-data-clk {
> + pins = "gpio130", "gpio131", "gpio132";
> + function = "qup05";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi5_cs: qup-spi5-cs {
> + pins = "gpio133";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c6_data_clk: qup-i2c6-data-clk {
> + pins = "gpio132", "gpio133";
> + function = "qup06";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi6_data_clk: qup-spi6-data-clk {
> + pins = "gpio132", "gpio133", "gpio130";
> + function = "qup06";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi6_cs: qup-spi6-cs {
> + pins = "gpio131";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_uart7_rx: qup-uart7-rx {
> + pins = "gpio135";
> + function = "qup07";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + qup_uart7_tx: qup-uart7-tx {
> + pins = "gpio134";
> + function = "qup07";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + qup_uart8_default: qup-uart8-default {
> + pins = "gpio18", "gpio19", "gpio20", "gpio21";
> + function = "qup10";
> + };
> +
> + qup_i2c9_data_clk: qup-i2c9-data-clk {
> + pins = "gpio22", "gpio23";
> + function = "qup11";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi9_data_clk: qup-spi9-data-clk {
> + pins = "gpio22", "gpio23", "gpio24";
> + function = "qup11";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi9_cs: qup-spi9-cs {
> + pins = "gpio25";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c10_data_clk: qup-i2c10-data-clk {
> + pins = "gpio24", "gpio25";
> + function = "qup12";
> + drive-strength = <2>;
> + bias-pulll-up;
> + };
> +
> + qup_spi10_data_clk: qup-spi10-data-clk {
> + pins = "gpio24", "gpio25", "gpio22";
> + function = "qup12";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi10_cs: qup-spi10-cs {
> + pins = "gpio23";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c11_data_clk: qup-i2c11-data-clk {
> + pins = "gpio26", "gpio27";
> + function = "qup13";
> + drive-strength = <2>;
> + bias-pulll-up;
> + };
> +
> + qup_spi11_data_clk: qup-spi11-data-clk {
> + pins = "gpio26", "gpio27", "gpio28";
> + function = "qup13";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi11_cs: qup-spi11-cs {
> + pins = "gpio29";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c12_data_clk: qup-i2c12-data-clk {
> + pins = "gpio28", "gpio29";
> + function = "qup14";
> + drive-strength = <2>;
> + bias-pulll-up;
> + };
> +
> + qup_spi12_data_clk: qup-spi12-data-clk {
> + pins = "gpio28", "gpio29", "gpio26";
> + function = "qup14";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi12_cs: qup-spi12-cs {
> + pins = "gpio27";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c13_data_clk: qup-i2c13-data-clk {
> + pins = "gpio30", "gpio31";
> + function = "qup15";
> + drive-strength = <2>;
> + bias-pulll-up;
> + };
> +
> + qup_spi13_data_clk: qup-spi13-data-clk {
> + pins = "gpio30", "gpio31", "gpio32";
> + function = "qup15";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi13_cs: qup-spi13-cs {
> + pins = "gpio33";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_uart13_default: qup-uart13-default {
> + pins = "gpio30", "gpio31", "gpio32", "gpio33";
> + function = "qup15";
> + };
> +
> + qup_i2c14_data_clk: qup-i2c14-data-clk {
> + pins = "gpio34", "gpio35";
> + function = "qup16";
> + drive-strength = <2>;
> + bias-pulll-up;
> + };
> +
> + qup_spi14_data_clk: qup-spi14-data-clk {
> + pins = "gpio34", "gpio35", "gpio36";
> + function = "qup16";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi14_cs: qup-spi14-cs {
> + pins = "gpio37", "gpio38";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_i2c15_data_clk: qup-i2c15-data-clk {
> + pins = "gpio40", "gpio41";
> + function = "qup17";
> + drive-strength = <2>;
> + bias-pulll-up;
> + };
> +
> + qup_spi15_data_clk: qup-spi15-data-clk {
> + pins = "gpio40", "gpio41", "gpio30";
> + function = "qup17";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi15_cs: qup-spi15-cs {
> + pins = "gpio31";
> + drive-strength = <6>;
> + bias-disable;
> + };
> + };
> +
> + apps_smmu: apps-smmu@15000000 {
> + compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
> + "arm,mmu-500";
> + reg = <0x0 0x15000000 0x0 0x100000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + intc: interrupt-controller@17200000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */
> + <0x0 0x17260000 0x0 0x80000>; /* GICR * 4 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + timer@17420000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + reg = <0x0 0x17420000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@17421000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17421000 0x0 0x1000>,
> + <0x0 0x17422000 0x0 0x1000>;
> + };
> +
> + frame@17423000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17423000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17425000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17425000 0x0 0x1000>,
> + <0x0 0x17426000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17427000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17427000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17429000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17429000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@1742b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x1742b000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@1742d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x1742d000 0x0 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + apps_rsc: rsc@17a00000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";

compatible, then reg, then the rest.

> + reg = <0x0 0x17a00000 0x0 0x10000>,
> + <0x0 0x17a10000 0x0 0x10000>,
> + <0x0 0x17a20000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 0>;
> +
> + apps_bcm_voter: bcm_voter {

Eh...

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

> + compatible = "qcom,bcm-voter";
> + };




Best regards,
Krzysztof