[PATCH v2 08/10] ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13

From: Fabrice Gasnier
Date: Fri Oct 14 2022 - 10:17:20 EST


Add gpio pin configuration to be used with stm32g0 typec controller. Define
the PI2 to enable internal pull-up on stm32mp13, used as interrupt pin on
stm32mp135f-dk board.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
---
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index efdd163eba30..5c85c9fc583c 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -165,6 +165,13 @@ pins {
};
};

+ stm32g0_intn_pins_a: stm32g0-intn-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, GPIO)>;
+ bias-pull-up;
+ };
+ };
+
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
--
2.25.1