[PATCH v2 1/2] xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

From: Mario Limonciello
Date: Thu Oct 06 2022 - 17:16:06 EST


For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3. Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.

As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.

In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers.

Suggested-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
drivers/usb/host/xhci-pci.c | 18 +-----------------
1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index dce6c0ec8d340..0d2d1cea94a4f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -69,14 +69,6 @@
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 0x161a
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 0x161b
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 0x161d
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 0x161e
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 0x15d6
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 0x15d7
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 0x161c
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8 0x161f

#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
@@ -336,15 +328,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
xhci->quirks |= XHCI_NO_SOFT_RETRY;

- if (pdev->vendor == PCI_VENDOR_ID_AMD &&
- (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
+ if (xhci->hci_version >= 0x102)
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;

if (xhci->quirks & XHCI_RESET_ON_RESUME)
--
2.34.1