Re: [PATCH] mm: slub: make slab_sysfs_init() a late_initcall

[Rasmus Villemoes]

On 03/10/2022 10.17, Hyeonggon Yoo wrote:
> On Fri, Sep 30, 2022 at 12:27:12PM +0200, Rasmus Villemoes wrote:
>> Currently, slab_sysfs_init() is an __initcall aka device_initcall. It
>> is rather time-consuming; on my board it takes around 11ms. That's
>> about 1% of the time budget I have from U-Boot letting go and until
>> linux must assume responsibility of keeping the external watchdog
>> happy.
>>
>> There's no particular reason this would need to run at device_initcall
>> time, so instead make it a late_initcall to allow vital functionality
>> to get started a bit sooner.
>>
>> This actually ends up winning more than just those 11ms, because the
>> slab caches that get created during other device_initcalls (and before
>> my watchdog device gets probed) now don't end up doing the somewhat
>> expensive sysfs_slab_add() themselves. Some example lines (with
>> initcall_debug set) before/after:
>>
>> initcall ext4_init_fs+0x0/0x1ac returned 0 after 1386 usecs
>> initcall journal_init+0x0/0x138 returned 0 after 517 usecs
>> initcall init_fat_fs+0x0/0x68 returned 0 after 294 usecs
>>
>> initcall ext4_init_fs+0x0/0x1ac returned 0 after 240 usecs
>> initcall journal_init+0x0/0x138 returned 0 after 32 usecs
>> initcall init_fat_fs+0x0/0x68 returned 0 after 18 usecs
>>
>> Altogether, this means I now get to petting the watchdog around 17ms
>> sooner. [Of course, the time the other initcalls save is instead spent
>> in slab_sysfs_init(), which goes from 11ms to 16ms, so there's no
>> overall change in boot time.]
> 
> This looks okay and just curious,
> can you explain what kind of benefit does enabling watchdog early provides?

The watchdog is _always_ enabled, from power-on onwards. There's nothing
one can do to disable it (short of using a soldering iron to modify the
board...), and usually nothing one can do to program its timeout [if it
is at all configurable, it's done during board design using appropriate
resistor/capacitor values].

All the custom boards I've met, across the very different industries
I've worked with, have always had such an external watchdog. Their
timing requirements may vary; currently I'm working on a board which has
a 1s margin, but I've also encountered something as low as (IIRC) 400ms.

While 10-20ms may not sound impressive, this is not the first nor the
last patch I'm trying to get upstream (see e7cb072eb988 for another
example, done in connection with another project) to gain as much margin
as possible - we want to be able to continue to upgrade our kernels for
the next 5, 10, 20 years, and undoubtedly the mainline kernel will grow
features and overhead in that timespan which won't be offset by better
compilers.

Rasmus