Re: [PATCH V3 3/6] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
From: Yu Tu
Date: Thu Sep 29 2022 - 03:08:08 EST
Hi Jerome,
Thank you for your reply.
On 2022/9/28 23:27, Jerome Brunet wrote:
[ EXTERNAL EMAIL ]
On Wed 21 Sep 2022 at 16:40, Yu Tu <yu.tu@xxxxxxxxxxx> wrote:
Hi Jerome，
On 2022/8/30 15:37, Yu Tu wrote:
On 2022/8/30 14:44, Jerome Brunet wrote:
[ EXTERNAL EMAIL ]
On Tue 30 Aug 2022 at 14:13, Yu Tu <yu.tu@xxxxxxxxxxx> wrote:
On 2022/8/29 17:48, Jerome Brunet wrote:
[ EXTERNAL EMAIL ]
On Mon 15 Aug 2022 at 21:20, Yu Tu <yu.tu@xxxxxxxxxxx> wrote:
+
+static struct clk_regmap s4_hdmi_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ /*
+ * Display directly handle hdmi pll registers ATM, we need
+ * NOCACHE to keep our view of the clock as accurate as
+ * possible
+ */
Is it really ?
Given that HDMI support for the s4 is there yet, the
addresses have changes and the region is no longer a syscon, it is
time
for the HDMI driver to get fixed.
The HDMI PLL is configured in the Uboot phase and does not change the
frequency in the kernel phase. So we use the NOCACHE flag and
"ro_ops".
That's no reason to put NOCACHE or ro-ops
If you want the frequencies to be statically assinged, the correct way
would be through assigned-rate in DT I guess.
Okay. You're right. However, when registering with OPS, HDMI PLL will be
reset. It takes time for PLL to stabilize the output frequency, which
will
lead to the startup screen flashing.
I would like to know how to solve this problem if not using ro_ops.
You can add new ops or tweak the current init function.
HDMI PLL is not different from other PLLS, so I think adding OPS is
weird.
Safest would be to do the following :
* Check if the PLLs is already on.
* Check if the 'pll->init_regs' matches what is already set
- if so, you can skip the reset
- if not, you need to reset as usual
static int meson_clk_pll_init(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
if (pll->init_count) {
meson_parm_write(clk->map, &pll->rst, 1);
regmap_multi_reg_write(clk->map, pll->init_regs,
| pll->init_count);
meson_parm_write(clk->map, &pll->rst, 0);
}
return 0;
}
Because the init function looks like this. Therefore, HDMI PLL init_count
is not given.
I don't get the remark. You've got pll->init_count right there.
Can I change it like this?
What change ? The function above looks a lot like meson_clk_pll_init()
in the actual source
I don't know if this change meets your requirements? Please give us your
valuable advice.
What change ?
static struct clk_regmap s4_hdmi_pll_dco = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = ANACTRL_HDMIPLL_CTRL0,
.shift = 28,
.width = 1,
},
.m = {
.reg_off = ANACTRL_HDMIPLL_CTRL0,
.shift = 0,
.width = 8,
},
.n = {
.reg_off = ANACTRL_HDMIPLL_CTRL0,
.shift = 10,
.width = 5,
},
.frac = {
.reg_off = ANACTRL_HDMIPLL_CTRL1,
.shift = 0,
.width = 17,
},
.l = {
.reg_off = ANACTRL_HDMIPLL_CTRL0,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = ANACTRL_HDMIPLL_CTRL0,
.shift = 29,
.width = 1,
},
.range = &s4_gp0_pll_mult_range,
},
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll_dco",
.ops = &meson_clk_pll_ops,
.parent_data = (const struct clk_parent_data []) {
{ .fw_name = "xtal", }
},
.num_parents = 1,
},
};
This is my code right now. Because init_count and init_regs are not
defined, HDMI PLL is not reset. In this way, the kernel will not blink
when the Uboot starts. Then in the kernel stage, if we want to change
the HDMI PLL frequency value, we can directly change M, N and OD. In
fact, we will not change the HDMI PLL frequency value later.
I wonder if you accept this change?