Re: [PATCH v5 12/12] Documentation/x86: Update resctrl_ui.rst for new features

From: Moger, Babu
Date: Wed Sep 28 2022 - 11:25:08 EST


Hi Sanjaya,


On 9/27/22 23:25, Bagas Sanjaya wrote:
> On Tue, Sep 27, 2022 at 03:27:00PM -0500, Babu Moger wrote:
>> + Following are the types of events supported:
>> +
>> + ==== ========================================================
>> + Bits Description
>> + ==== ========================================================
>> + 6 Dirty Victims from the QOS domain to all types of memory
>> + 5 Reads to slow memory in the non-local NUMA domain
>> + 4 Reads to slow memory in the local NUMA domain
>> + 3 Non-temporal writes to non-local NUMA domain
>> + 2 Non-temporal writes to local NUMA domain
>> + 1 Reads to memory in the non-local NUMA domain
>> + 0 Reads to memory in the local NUMA domain
>> + ==== ========================================================
>> +
>> + By default, the mbm_total_bytes configuration is set to 0x7f to count
>> + all the event types and the mbm_local_bytes configuration is set to
>> + 0x15 to count all the local memory events.
>> +
>> + Example::
>> +
>> + To view the current configuration, run the command.
>> + # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
>> + 0:0x7f;1:0x7f;2:0x7f;3:0x7f
>> +
>> + # cat /sys/fs/resctrl/info/L3_MON/mbm_local_config
>> + 0:0x15;1:0x15;3:0x15;4:0x15
>> +
>> + To change the mbm_total_bytes to count only reads on domain 0,
>> + run the command. The bits 0,1,4 and 5 needs to set.
>> +
>> + # echo "0:0x33" > /sys/fs/resctrl/info/L3_MON/mbm_total_config
>> +
>> + # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
>> + 0:0x33;1:0x7f;2:0x7f;3:0x7f
>> +
>> + To change the mbm_local_bytes to count all the slow memory reads on
>> + domain 1, run the command. The bits 4 and 5 needs to set.
>> +
>> + # echo "1:0x30" > /sys/fs/resctrl/info/L3_MON/mbm_local_config
>> +
>> + # cat /sys/fs/resctrl/info/L3_MON/mbm_local_config
>> + 0:0x15;1:0x30;3:0x15;4:0x15
>>
> Hi Babu,
>
> The description text for each snippets above shouldn't in the code
> block. Also, split the block into three code blocks in the lists:
Did you mean, I need to remove similar texts from code?
>
> ---- >8 ----
> diff --git a/Documentation/x86/resctrl.rst b/Documentation/x86/resctrl.rst
> index b4fe54f219b6f3..ec578b069276ce 100644
> --- a/Documentation/x86/resctrl.rst
> +++ b/Documentation/x86/resctrl.rst
> @@ -206,25 +206,26 @@ with the following files:
> all the event types and the mbm_local_bytes configuration is set to
> 0x15 to count all the local memory events.
>
> - Example::
> + Examples:
> +
> + * To view the current configuration::
>
> - To view the current configuration, run the command.
> # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
> 0:0x7f;1:0x7f;2:0x7f;3:0x7f
>
> # cat /sys/fs/resctrl/info/L3_MON/mbm_local_config
> 0:0x15;1:0x15;3:0x15;4:0x15
>
> - To change the mbm_total_bytes to count only reads on domain 0,
> - run the command. The bits 0,1,4 and 5 needs to set.
> + * To change the mbm_total_bytes to count only reads on domain 0
> + (the bits 0, 1, 4 and 5 needs to be set)::
>
> # echo "0:0x33" > /sys/fs/resctrl/info/L3_MON/mbm_total_config
>
> # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
> 0:0x33;1:0x7f;2:0x7f;3:0x7f
>
> - To change the mbm_local_bytes to count all the slow memory reads on
> - domain 1, run the command. The bits 4 and 5 needs to set.
> + * To change the mbm_local_bytes to count all the slow memory reads on
> + domain 1 (the bits 4 and 5 needs to be set)::
>
> # echo "1:0x30" > /sys/fs/resctrl/info/L3_MON/mbm_local_config
>

Thanks for the diff. I cannot get this right for some reason. I will
probably send the diff before the final series.


>
> Also, there isn't description of mapping from bits from the supported events
> table to the bytes input for mbm_{total,local}_config.

It is already there. Is that not clear?

+        Following are the types of events supported:
+
+        ====    ========================================================
+        Bits    Description
+        ====    ========================================================
+        6       Dirty Victims from the QOS domain to all types of memory
+        5       Reads to slow memory in the non-local NUMA domain
+        4       Reads to slow memory in the local NUMA domain
+        3       Non-temporal writes to non-local NUMA domain
+        2       Non-temporal writes to local NUMA domain
+        1       Reads to memory in the non-local NUMA domain
+        0       Reads to memory in the local NUMA domain
+        ====    ========================================================


>
>> +Slow Memory b/w domain is L3 cache.
>> +::
>> +
>> + SMBA:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
>> +
> What b/w stands for in the context above?
b/w is bandwidth. I will correct it.
>
>> Reading/writing the schemata file
>> ---------------------------------
>> Reading the schemata file will show the state of all resources
>> @@ -479,6 +567,44 @@ which you wish to change. E.g.
>> L3DATA:0=fffff;1=fffff;2=3c0;3=fffff
>> L3CODE:0=fffff;1=fffff;2=fffff;3=fffff
>>
>> +Reading/writing the schemata file (on AMD systems)
>> +--------------------------------------------------
>> +Reading the schemata file will show the state of all resources
>> +on all domains. When writing the memory bandwidth allocation you
>> +only need to specify those values in an absolute number expressed
>> +in 1/8 GB/s increments. To allocate bandwidth limit of 2GB, you
>> +need to specify the value 16 (16 * 1/8 = 2). E.g.
>> <snipped>...
>> +Reading the schemata file will show the state of all resources
>> +on all domains. When writing the memory bandwidth allocation you
>> +only need to specify those values in an absolute number expressed
>> +in 1/8 GB/s increments. To allocate bandwidth limit of 8GB, you
>> +need to specify the value 64 (64 * 1/8 = 8). E.g.
> s/E.g./For example:/

Thanks

Babu Moger