[PATCH v6 0/3] Initial Samsung Galaxy Tab 4 10.1 (SM-T530) support

From: Matti Lehtimäki
Date: Tue Sep 27 2022 - 17:50:00 EST


Add device tree node for pm8226 GPIOs and support for the Samsung Galaxy
Tab 4 10.1 (SM-T530) tablet which is based on apq8026.

Changes in v6:
- Set status as last property in nodes
- Pad register addresses to 8 hex digits

Changes in v5:
- Rename pm8226-regulators node to fix issue reported by make dtbs_check

Changes in v4:
- Move delete-node to memory-region
- Move usb-switch node to blsp_i2c4

Changes in v3:
- Fix sdhc_2 bus width
- Reorder includes

Changes in v2:
- Change codename to matisse-wifi
- Remove msm-id from device dts
- Rename pm8226 gpio node

Matti Lehtimäki (3):
ARM: dts: qcom: pm8226: Add node for the GPIOs
dt-bindings: arm: qcom: Document samsung,matisse-wifi device
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)

.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-apq8026-samsung-matisse-wifi.dts | 453 ++++++++++++++++++
arch/arm/boot/dts/qcom-pm8226.dtsi | 10 +
4 files changed, 465 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts

--
2.34.1